BAYRAKTAR Emin


Détails :

Statut : Professeur des universités

Habilité à diriger des recherches : oui

Section CNU : 60/28

Equipe : Tribologie et matériaux
Tél : 0149452954
Fax : 0149452959
Courriel : bayraktar@supmeca.fr
Adresse : 3, rue Fernand Hainaut - 93407 Saint Ouen

Responsabilités en laboratoire :

Academic history
*Full Professor, academic and research staff-member at Mechanical & Manufacturing engineering at SUPMECA/LISMMA-Paris and research staff at CNAM industrial materials laboratory –Paris since 1994
*B.Sc., M.Sc. and PhD - DSc in Mechanical and manufacturing engineering (1983), Thesis advisor; Prof. Paul G. Shewmon (OSU-USA) (Robert College - Bosphorous University/ Istanbul)
*B.Sc., M.Sc. and PhD. in materials science and engineering (1997) (CNAM - Arts et Métiers/Paris). Thesis advisor; Prof. Jean Pierre Chevalier (CNRS-CNAM-Paris)*Habilitation (HDR) in mechanical engineering (2000) (University Pierre et Marie Curie, Paris VI)
Social status
*French citizen (1995), born 1954 in Istanbul, married

Activités en enseignement :

Developed teaching courses and term projects
*Materials Science Engineering, Metallurgical Engineering, Manufacturing processes,Welding, Metal forming, Welding-Casting, semisolid, thixoforming,sintering
*Fatigue and Damage mechanisms in materials, Defects in manufacturing processes
*Ceramics and Powder metallurgy
*Special topics in Materials processing/Heat treatment of steels and non ferrous alloys, usage and properties of metallic materials, Materials choice in mechanical engineering
*Adviser or co-adviser for graduate and undergraduate students (Advised & co-advised theses: 14 PhD, 74 MSc

Activités de recherche :

Research keywords
*Advanced manufacturing processes
*Damage mechanisms of materials (metallic, intermetallics, rubber & composites)
*Design of new composites and damage characterization
My major research interest include
*Damage mechanisms in materials (metallic, intermetallic, rubber, composites)
*Advanced Manufacturing processes
*Development of new composite materials in aerospace engineering
*Development new type of steels; ultra fine grain, composite steel reinforced by ceramic particles

Responsabilités collectives :

Scientific acknowledgement
*Adviser and/or co-adviser for undergraduate and graduate students
*Fellow of WAMME (World Academy of Science in Materials and Manufacturing Engineering)
*Editorial Board of JAMME (International Journal of Achievement in Materials and Manufacturing Engineering)
*Editorial Board of OCSJ (Open Ceramic Science Journal)
*Editorial board of IJCCS (International Journal of Chemical Current Sciences)
*Editor: Welding and Bonding Technologies, Volume 6 (ELSEVIER SCIENCE -England, Major reference Work (MRW) - Handbook)
*Editorial board-regional editor & Steering Committee of AMPT - Advanced Materials Processing technologies
*Editorial board & R. Editor of Journal of Composites-Hindawi-USA
*Organising committee of AMPT - 2010 – Advanced Materials Processing Technologies
*Advisory - Steering Committee of APCMP – Asian-Pacific Materials Processing


Référent LISMMA de projet(s) :

Development of New Aluminium Matrix Composites (AMCs) reinforced with magnetic nano particles for aeronautic and aerospace industrial applications
Development of new aluminum matrix composites by thixoforming for aeronautical applications


Directeur de thèses en cours :

 M’HAMDI Mohamed Baccar (Approche expérimentale et numérique du phénomène de la coupe en Fraisage gra...)

Directeur de thèses soutenues :

 ALHAS Haydar Ali (An innovative operational management toward process excellence for production of...)

 ZAIMOVA Diana (Design of new elastomeric composites used in manufacturing engineering: Effect o...)


Publications :

• Revues internationales

Ali Kurşun, Mehmet Şenel, Halil M. Enginsoy, Emin Bayraktar
Effect of impactor shapes on the low velocity impact damage of sandwich composite plate: Experimental study and modelling
Composites Part B: Engineering, ELSEVIER-USA, vol. 86, no. 1, pp. 143-152, ed. D. Hui, Elsevier-USA, 2016
(go to journal)

A. Kurşun, E. Bayraktar, H.-M. Enginsoy
Experimental and Numerical Study of Alumina Reinforced Aluminium Matrix Composites: Processing, Microstructural Aspects and Properties
Composites Part B: Engineering, ELSEVIER-USA, vol. In press, Accepted papers, pp. 1-14, 2016

L-M-P. Ferreira, E. Bayraktar, M-H. Robert
Magnetic and electrical properties of aluminium matrix composite reinforced with magnetic nano iron oxide
JAMPT, Journal of Advances in Materials and Processing Technologies, Taylor & Francis-USA, vol. 2, no. 1, pp. 165-173, ed. S. HASHMI-Taylor & Francis-USA, 2016
(go to journal)

Diana ZAIMOVA, Emin BAYRAKTAR, Ibrahim MISKIOGLU
Design and manufacturing of new elastomeric composites: mechanical properties, chemical and physical analysis
International Journal of Composites, Part B, Elsevier, USA, vol. 1, no. 1, pp. 1-12, ed. D. Hui, 2016

FERREIRA, Lygia Maria Policarpio, ROBERT, Maria Helena, BAYRAKTAR, Emin
Production of Aluminum / SiC / NiAl2O4 MMCs by Thixoforming of Recycled Chips
Int. J. of Solid State Phenomena , vol. 217-218, no. 1, pp. 286--293, ed. Trans Tech Publications, Switzerland, 2015
(go to journal)

Imed Miraoui, Mohamed Boujelbene and Emin Bayraktar
Analysis of cut surface quality of sheet metals obtained by laser machining: thermal effects
JAMPT, Journal of Advances in Materials and Processing Technologies, Taylor & Francis-USA, vol. 1, no. 3-4, pp. 633-642, ed. S. HASHMI-Taylor & Francis-USA, 2015
(go to journal)

A. Kursun, E. Bayraktar, M-H. Robert
Low cost manufacturing of aluminium-alumina composites
JAMPT, Journal of Advances in Materials and Processing Technologies, Taylor & Francis-USA, vol. 1, no. 3-4, pp. 515-528, ed. S. HASHMI-Taylor & Francis-USA, 2015
(go to journal)

D. Zaimova, E. Bayraktar, I. Miskioglu, D. Katundi, Z. Hamouche
Manufacturing and Damage Analysis of Filler Reinforced Epoxy Based Composites
IJMPT, International Journal of Materials and Product Technology, vol. 48, no. 1-4, pp. 47-65, ed. Inder Science, 2014
0268-1900 / 1741-5209

E. Bayraktar, F. Ayari, M-J. Tan, A. Tosun Bayraktar, D. Katundi
Manufacturing of aluminum matrix composites reinforced with iron-oxide nanoparticles: microstructural and mechanical properties
Metallurgical and Materials Transactions B, vol. 45B, no. 26, pp. 352-362, ed. David E. Laughlin, ASM-TMS/USA, 2014
(go to journal)

Hongqian Xue, Qian Tao, Emin Bayraktar
Effect of interference-fit on fatigue life for composite lap joints - Experimental and Modelling,
Advanced Materials Research, AMR , vol. 939, pp. 39-46, ed. Trans Tech Publications, Switzerland, 2014
(go to journal)

D. Zaimova, E. Bayraktar, M. J. Tan, I. Miskioglu
Processing of Epoxy-Nickel Matrix Composites Reinforced with Aluminum and Waste Elastomers,
Advanced Materials Research, AMR , vol. 939, no. 1, pp. 98-105, ed. Trans Tech Publications, Switzerland, 2014
(go to journal)

Lygia Maria Policarpio Ferreira, Maria Helena Robert, Emin Bayraktar, Diana Zaimova
New design of aluminium based composites through combined method of powder metallurgy and thixoforming
Advanced Materials Research, AMR , vol. 939, no. 1, pp. 68-75, ed. Trans Tech Publications, Switzerland, 2014
(go to journal)

Diana Zaimova, Emin Bayraktar, Ibrahim Miskioglu, Nikolay Dishovsky
Wear Resistance of Elastomeric based Composites by Continuous Multi-Cycle Indentation used in Manufacturing Engineering,
Advanced Materials Research, AMR , vol. 939, no. 1, pp. 106-113, ed. Trans Tech Publications, Switzerland, 2014
(go to journal)

Diana Zaimova1, Emin Bayraktar, I. Miskioglu, Dhurata Katundi, Nikolay Dishovsky
New Design of Composite Materials Based on Scrap Rubber Matrix Reinforced with Epoxy and SiC
Advanced Materials Research, AMR , vol. 939, no. 1, pp. 114-121, ed. Trans Tech Publications, Switzerland, 2014
(go to journal)

Yongsheng WANG, Ming Jen TAN, Beng Wah CHUA, Bayraktar Emin
YSZ-reinforced Mg-based amorphous composites: Processing, Characterization & Corrosion
Advanced Materials Research, AMR , vol. 939, no. 1, pp. 122-129, ed. Trans Tech Publications, Switzerland, 2014
(go to journal)

Miraoui Imed; Boujelbene Mohamed; Bayraktar Emin
Analysis of Roughness and Microstructure for High-Power Laser Cutting of Stainless Steel
Advanced Science Letters , vol. 19, no. 2, pp. 483-486, ed. American Scientific Publishers , 2013
ISSN 1936-6612

Imed Miraoui, Mohamed Boujelbene, Emin Bayraktar
Effects of Laser Cutting Main Parameters on Microhardness and Microstructure Changes of Stainless Steel
Advanced Materials Research , vol. 664, pp. 811-816, ed. AMR, 2013
10.4028/www.scientific.net/AMR.664.811

LIAO Jinzhi, TAN Ming-Jen, Bayraktar Emin
Tension-Tension Fatigue Behaviour of Carbon Nanotube Reinforced Aluminum Composites
Materials Science Forum, vol. 765, pp. 563-567, ed. Trans Tech Publications, Switzerland, 2013
(go to journal)

H-A. Alhas, E. Bayraktar, C. Nizam, J. Khalil,
Damage analysis of composites integrated with RFID chip used in aeronautics
Archives of Materials Science and Engineering , vol. 59/1 , no. 1, pp. 5-13, ed. ed. WAMME-Academy of Science, OCSCO World Press, 2013., 2013
ISSN 1897-2764

YS Wang, Ming-Jen Tan, Beng Wah Chua, Bayraktar Emin
Tungstate ion-assisted hydrothermal conversion of magnesium hydroxide coatings on AZ31 magnesium alloy
International Journal of Surface Science and Engineering (ISSE), vol. 1, no. In Press, Accepted Manuscript, pp. 1-8, ed. Inderscience Publishers Ltd., 2013

S. Sohail Akhtar, Bekir Sami Yilbas, and Emin Bayraktar
Thermal stress distributions and microstructure in laser cutting of thin Al–Si alloy sheets (Experimental and FEM)
International Journal of LASER Applications (American Journal), vol. 25, no. 4, pp. 1-12, ed. Laser Institute of America, Editor-in-Chief: Reinhart Poprawe , 2013
(go to journal)

Mohamed Baccar Mhamdi, Sahbi Ben Salem, Mohamed Boujelbene, Emin Bayraktar
Experimental study of the chip morphology in turning hardened AISI D2 steel
Journal of Mechanical Science and Technology , vol. 27 , no. 11, pp. 3451-3461, ed. J. Hwang / Springer link, 2013
(go to journal)

Bekir Sami Yilbas, S.S. Akhtar, E. Bayraktar, Zuhair M. Gasem
Laser Cutting of Thin Aluminum and Silicon Alloy: Influence of Laser Power on Kerf Width
Advanced Materials Research, vol. 445, no. Materials and Manufacturing Technologies XIV, pp. 442-447, 2012

S. Ben Salem, W. Tebni, E. Bayraktar,
Prediction of surface roughness by experimental design methodology in Electrical Discharge Machining (EDM),
JAMME, Journal of Achievements in Materials and Manufacturing Engineering , vol. 49, no. 2, pp. 150-157, ed. WAMME, 2012
ISSN 1734-8412
(go to journal)

D. Zaimova, D. Katundi, E. Bayraktar*, N. Dishovsky
Elastomeric matrix composites: effect of processing conditions on the physical, mechanical and viscoelastic properties
Journal of Achievements in Materials and Manufacturing Engineering, JAMME, vol. vol. 50, no. 2, pp. 81-91, ed. WAMME-Academy of Science, 2012
ISSN 1734-8412

S. Ben Salem, E. Bayraktar, M. Boujelbene, D. Katundi
Effect of cutting parameters on chip formation in orthogonal cutting
Journal of Achievements in Materials and Manufacturing Engineering, JAMME, vol. 50, no. 1, pp. 7-17, ed. WAMME-Academy of Science, 2012
ISSN 1734-8412

M-B. Mhamdi, M. Boujelbene, E. Bayraktar, A. Zghal
Surface Integrity of Titanium Alloy Ti-6Al-4V in Ball end Milling
Physics – Materials Procedia, vol. 25, no. 1, pp. 355-362, ed. Elsevier Science, 2012
ISSN: 1875-3892

M. Zaied, E. Bayraktar, D. Katundi, M. Boujelbene
Effect of Laser cutting parameters on surface quality of low carbon steel (S235)
JAMME, Journal of Achievements in Materials and Manufacturing Engineering , vol. 54, no. 1, pp. 128-134, ed. WAMME-Academy of Science, 2012
ISSN 1734-8412

Ayari Fatma, Ayari Fayza, Bayraktar Emin, Amar Chokri Ben
Image processing and Finite Element modelling for analysis of a metal matrix composite
International Journal of Computer Science Issues (IJCSI) , vol. 9, no. 5 , pp. 448-457, ed. www.IJCSI.org, 2012
ISSN: 1694-0814

E. Bayraktar, F. Ayari, D. Katundi, J-P. Chevalier and F. Bonnet
Weldability and Toughness Evaluation of Ceramic reinforced steel matrix Composites (TiB2-RSMC)
Advanced Materials Research, vol. 3, no. 1, pp. 486-494, ed. S. HASHMI - AMPT, 2011

F. Ayari, E. Bayraktar and J-P. Chevalier
A FEM based Numerical-Experimental Study for Determining Strength Properties by Micro Indentation of a Metal Matrix Composite
Advanced Materials Research, vol. 3, no. 1, pp. 495-500, ed. S. HASHMI - AMPT, 2011

F. Ayari, A. Zghal and E. Bayraktar
Numerical and Mathematical Modelling of cracked Titanium Shell under Compression
Advanced Materials Research, vol. 3, no. 1, pp. 501-506, ed. S. HASHMI - AMPT, 2011

A. Daymi, M. Boujelbene, E. Bayraktar, A. Ben Amara, D. Katundi
Influence of Feed Rate on Surface Integrity of Titanium Alloy in High Speed Milling
Advanced Materials Research, vol. 5, no. 1, pp. 1231-1237, ed. S. HASHMI, 2011

D. Zaimova, E. Bayraktar, N. Dishovsky
State of cure evaluation by different experimental methods in thick rubber parts
Journal of Achievements in Materials and Manufacturing Engineering, vol. 44 , no. 2, pp. 161-167, ed. Academy of Science-WAMME, 2011

E. Bayraktar, D. Katundi, B.S. Yilbas, J. Claeys
Toughness of welded stainless steels sheets for automotive industry
Journal of Achievements in Materials and Manufacturing Engineering, vol. 44, no. 1, pp. 35-41, ed. Academy of Science-WAMME, 2011

M. Boujelbene, E. Bayraktar
Mathematical model to choose effective cutting parameters in electroerosion
J. of Ach. in Materials and Manufacturing Engineering, JAMME, July 2011, vol. 47, no. 1 , pp. 97-102, ed. WAMME-World Academy of Science, 2011
1734-8412

H. Xue, E. Bayraktar and C. Bathias
Torsional Fatigue behaviour and damage mechanism of a cast aluminum alloy in very high cycle regime
Advanced Materials Research , vol. 264-265 , pp. 706-711, ed. Trans Tech Publications, Switzerland, 2011

F. Belarifi and E. Bayraktar
The Tredgold method in reverse engineering to check the assembly of a conical spur gear using CAD
Advanced Materials Research , vol. 264-265 , pp. 1598-1603, ed. Trans Tech Publications, Switzerland, 2011

Fayza AYARI, Emin BAYRAKTAR
Parametric Finite Element Analysis for a square cup deep drawing process (Monograph)
JAMME, Journal of Achievement in Materials and Manufacturing Engineering, vol. 48, no. 1, pp. 64-86, ed. (WAMME) International OCSCO World Press, 2011
ISSN 1734-8412
(go to journal)

E. Bayraktar, F. Ayari, D. Katundi, J.-P. Chevalier, F. Bonnet
Damage analysis of the ceramic reinforced steel matrix composites sheets: experimental and numerical study
JAMME, J. of Ach. in Materials and Manufacturing Engineering , vol. 49, no. 1, pp. 53-61, ed. WAMME, 2011
(ISSN 1734-8412

F. Ayari, E. Bayraktar
Fretting wear damage-I: numerical study of composite steel sheets reinforced with TiB2
Fretting wear damage-I: numerical study of composite steel sheets reinforced with TiB2 , vol. 51 , no. 1, pp. 48-54, ed. WAMME, 2011
ISSN 1897-2764

D. KATUNDI, A. TOSUN-BAYRAKTAR, E. BAYRAKTAR, D. TOUEIX
Corrosion behaviour of the welded parts used in automotive industry
Journal of Achievement of materials and manufacturing Engineering, JAMME, vol. 38, no. 2, pp. 146-153, ed. L. Dobrzanski, 2010

E. BAYRAKTAR, D. KATUNDI
New aluminum matrix composites reinforced with iron oxide
Journal of Achievements in Materials and Manufacturing Engineering, JAMME, vol. 38, no. 1, pp. 7-14, ed. L. Dobrzanski, 2010

E. BAYRAKTAR, H. XUE, F. AYARI, C. BATHIAS
Torsional fatigue damage mechanisms in the very high cycle regime
Journal of Archives of Materials Science and Engineering, vol. 43, no. 2, pp. 77-86, ed. L. Dobrzanski, 2010

A.DAYMI, M.BOUJELBENE, E.BAYRAKTAR, D.KATUNDI
Surface integrity in high speed end milling of titanium alloy Ti-6Al-4V
Journal of Materials Science and Technology, 2010

D. Zaimova, E. Bayraktar and N. Dishovsky
State of Cure Measurements by Different Techniques in Elastomeric Matrix Composites
Journal of Chemical Technology and Metallurgy, vol. 45, no. 3, pp. 261-264, ed. UCTM-Sophia, 2010

BESSRI K., MONTEMBAULT F., BAYRAKTAR E., BATHIAS C.,
An Understanding of Mechanical Behaviour and Damage Mechanism in Elastomers Using X-Ray Computed Tomography at Several Scales
International Journal of Tomography and Statistics, IJTS, vol. 14, no. S10, pp. 29-40, 2010
0972-9976

TEBNI W., BOUJELEBENE M., BAYRAKTAR E.,
Electrical Discharge Machining Conditions: Effect of Cutting Parameters on the Surface Integrity
Advanced Materials Research, vol. 83-86, pp. 725-737, 2010

PAWLAK Z., CARTWRIGHT P.S., OLOYEDE A., BAYRAKTAR E.,
Removal of Toxic As and Sb from Ground Water Spiro Tunnel Bulkhead in Park City Utah Using Colloidal Iron Hydroxide
Advanced Materials Research, vol. 83-86, pp. 553-562, 2010

DA SILVA BOTELHO T., ISAC N., BAYRAKTAR E.
A comparative study on the damage initiation mechanism of elastomeric composites-thin sheets
Archives of Journal of Computational Materials Science and Surface Engineering, vol. 1, no. 2, pp. 112-119, ed. inderscience-blackwell, 2009

PAWLAK Z., KALDONSKI T., PAI R., BAYRAKTAR E., OLOYEDE A.
A comparative study on the tribological behaviour of hexagonal boron nitride (h-BN) as lubricating micro-particles—An additive in porous sliding bearings for a car clutch
Wear, vol. 267, no. 5-8, pp. 1198-1202, 2009
(go to journal)

AYARI F., ZGHAL A., BAYRAKTAR E.
Comprehensive study of aluminium alloy plates under compression conditions
Journal of Materials Processing Technology, vol. 209, no. 4, pp. 1672-1680, ed. Elseviers science, 2009
(go to journal)

TEBNI W., BOUJELBENE M., BAYRAKTAR E.
Effect of Cutting parameters on the Surface Integrity: Electrical Discharge Machining (EDM) Conditions
The A. Journal for Science and Engineering, vol. 34, no. 1C, pp. 97-110, 2009

DA-SILVA BOTELHO T., BAYRAKTAR E.
Experimental and Numerical Study of Damage Initiation Mechanism in Elastomeric composites-Double Cantilever Beam specimens (DCB)
JAMME, Journal of Achievement in Materials and Manufacturing Engineering, vol. 36, no. 1, pp. 65-71, 2009

BAYRAKTAR Emin, MORA Rubén, GARCIA I.-M., BATHIAS Claude
Heat treatment, surface roughness and corrosion effects on the damage mechanism of mechanical components in the very high cycle fatigue regime
International Journal of Fatigue, vol. 31, no. 10, pp. 1532-1540, 2009
(go to journal)

BOUJELBENE M., BAYRAKTAR E., TEBNI W., BENSALEM S.,
Influence of machining parameters on the surface integrity in electrical discharge Machining
Archives of Materials Science and Engineering, vol. 37, no. 2, pp. 110-116, 2009

DAYMI A., BOUJELBENE M., BAYRAKTAR E.,
Influence of workpiece inclination angle on the surface roughness in ball end milling of the titanium alloy Ti-6Al-4V
JAMME, Achievement in Materials and Manufacturing Engineering, vol. 35, no. 1, pp. 79-86, 2009

TEBNI W., BOUJELBENE M., BAYRAKTAR E.,
Parametric approach model –I: Electrical Discharge Machining (EDM) conditions
The A. Journal for Science and Engineering, vol. 34, no. 1C, pp. 97-110, 2009

AYARI F., LAZGHAB T., BAYRAKTAR E.,
Parametric finite element analysis of square cup deep drawing
Archives of Journal of Computational Materials Science and Surface Engineering, vol. 1, no. 2, pp. 106-111, 2009

Bayraktar E., Chevalier J.P., Kaplan D. and Devillers L.
Physical Understanding of Ferrite Grain Growth during Welding in Interstitial Free Steels(IFS)
The A. Journal for Science and Engineering, vol. 34, no. 1C, pp. 111-123, 2009

WU T., MO T., BAYRAKTAR E.,
Theoretical and experimental study of Plastic Zone of a Circle Crack under Giga-Cycle Fatigue
Archives of Journal of Computational Materials Science and Surface Engineering (available online), vol. 1, no. 4, pp. 245-251, 2009

BAYRAKTAR E., GONZALEZ GARZA M.A., BATHIAS C.
A comprehensive study of plastic deformation mechanism of the metallic materials by ‘X-ray’ computed tomography (‘X-ray’ CT)
Journal of Materials Processing Technology, vol. 200, no. 1-3, pp. 133-145, ed. Elsevier, 2008
(go to journal)

BAYRAKTAR E., KAPLAN D., YILBAS B.S.
Comparative study: Mechanical and metallurgical aspects of tailored welded blanks (TWBs)
Journal of Materials Processing Technology, vol. 204, no. 1-3, pp. 440-450, ed. Elsevier, 2008
(go to journal)

XUE H.Q., BAYRAKTAR E., BATHIAS C.
Damage mechanism of a nodular cast iron under the very high cycle fatigue regime
Journal of Materials Processing Technology, vol. 202, no. 1-3, pp. 216-223, ed. Elsevier, 2008
(go to journal)

BAYRAKTAR E., ISAC N., BESSRI K., BATHIAS C.
Damage mechanisms in natural (NR) and synthetic rubber (SBR): nucleation, growth and instability of the cavitatio
International Journal of Fatigue and Fracture of the Structural Materials, vol. 31, no. 1, pp. 1-13, ed. Blackwell, 2008

BAYRAKTAR E., BESSRI K., BATHIAS C.
Deformation behaviour of elastomeric matrix composites under static loading conditions
Engineering Fracture Mechanics, vol. 75, no. 9, pp. 2695-2706, ed. Elsevier, 2008
(go to journal)

PAWLAK Z., PAI R., BAYRAKTAR E., KALDONSKI T., OLOYEDE A.
Lamellar lubrication in vivo and vitro: Friction testing of hexagonal boron nitride
Biosystems, vol. 94, no. 3, pp. 202-208, 2008
(go to journal)

BAYRAKTAR E., MASOUNAVE J., CAPLAIN R.,
Manufacturing and Damage Mechanisms in Metal Matrix Composites
Journal of Achievements in Materials and Manufacturing Engineering, JAMME, vol. 31, no. 2, pp. 294-300, 2008

BAYRAKTAR E., ANTOLOVICH S.D., BATHIAS C.
New developments in non-destructive controls of the composite materials and applications in manufacturing engineering
Journal of Materials Processing Technology, vol. 206, no. 1-3, pp. 30-44, ed. Elsevier, 2008
(go to journal)

BAYRAKTAR E., KAPLAN D., SCHMIDT F., PAQUETON H., GRUMBACH M.
State of art of impact tensile test (ITT): Its historical development as a simulated crash test of industrial materials and presentation of new “ductile/brittle” transition diagrams
Journal of Materials Processing Technology, vol. 204, no. 1-3, pp. 313-326, ed. Elsevier, 2008
(go to journal)

BOUJELBENE M., ABELLARD P., BAYRAKTAR E., TORBATY S.,
Study of the milling strategy on the tool life and the surface quality for knee protheses
International Journal of Achievements in Materials and Manufacturing Engineering, JAMME, vol. 31, no. 2, pp. 610-615, 2008

BELARIFI F., BAYRAKTAR E., BENAMAR A.,
The Reverse engineering to optimise the dimensional conical spur gear by CAD
Journal of Achievements in Materials and Manufacturing Engineering, JAMME, vol. 31, no. 2, pp. 429-433, 2008

XUE H.Q., BAYRAKTAR E., MARINES I., BATHIAS C.,
Torsional fatigue behaviour in gigacycle regime and damage mechanism of the perlitic steel
Journal of Achievements in Materials and Manufacturing Engineering, JAMME,, vol. 31, no. 2, pp. 391-397, 2008

FAYZA A., ZGHAL A., BAYRAKTAR E.
Analytic investigation for light alloy aluminium panels under compression
International journal of achievement in materials and manufacturing engineering, JAMME, vol. 25, no. 1, pp. 19-23, 2007

XUE H.Q., BAYRAKTAR E., BATHIAS C.
Damage initiation mechanism of a nodular cast iron under the very high cycle fatigue regime
International Journal of Computational Materials Science and Surface Engineering, vol. 1, no. 6, pp. 635-647, ed. inderscience-blackwell, 2007
(go to journal)

LUONG R., ISAC N., BAYRAKTAR E.
Damage initiation mechanisms of rubber
journal of archives of materials science and engineering, JAMME, vol. 28, no. 1, pp. 19-26, 2007

XUE H, BATHIAS C, BAYRAKTAR E.
Damage mechanisms of Ti-Al intermetallics in three point ultrasonic bending fatigue
International journal of achievement in materials and manufacturing engineering, JAMME, vol. 24, no. 1, pp. 153-161, 2007

BAYRAKTAR E., BESSRI K, BATHIAS C
Deformation behaviour of elastomeric matrix composites under static loading conditions
Engineering Fracture Mechanics, vol. 75, ed. Elsevier, 2007

BAYRAKTAR E., GRUMBACH M., KAPLAN D.,
Effect of forming rate on the impact tensile properties of the steels under crash test
International Journal of Achievements in Materials and Manufacturing Engineering, vol. 20, no. 1, pp. 55-60, 2007

DA SILVA BOTELHO T., BAYRAKTAR E., INGLEBERT G.
Experimental and finite element analysis of spring back in sheet metal forming
International Journal of Computationnal Materials Science and Surface Engineering, vol. 1, no. 2, pp. 197-213, 2007

LUONG R., ISAC N., BAYRAKTAR E.,
Failure mechanisms in thin rubber sheet composites under static solicitation
International Journal of Achievements in Materials and Manufacturing Engineering, vol. 21, no. 1, pp. 43-46, 2007

BAYRAKTAR E., KAPLAN D., DEVILLIERS L., CHEVALIER J.P.
Grain growth mechanism during the welding of interstitial free (IF) steels
Journal of Materials Processing Technology, vol. 189, no. 1-3, pp. 114-125, 2007

DA SILVA BOTELHO T., ISAC N., BAYRAKTAR E.
Modeling of damage initiation mechanism in rubber sheet composites under the static loading
International journal of achievement in materials and manufacturing engineering, JAMME, vol. 22, no. 2, pp. 55-59, 2007

DA SILVA BOTELHO T., BAYRAKTAR E., INGLEBERT G.
Comparison of experimental and simulation results of 2D-draw-bend springback
Journal of Achievements in Materials and Manufacturing Engineering, vol. 18, no. 1-2, pp. 275-278, 2006

BAYRAKTAR E., MOIRON J., KAPLAN D.
Effect of welding conditions on the formability characteristics of thin sheet steels
Journal of Materials Processing Technology, vol. 175, no. 1, pp. 20-26, 2006

BAYRAKTAR E., MARINES I., BATHIAS C.
Failure Mechanism of Automotive Metallic Alloys in Very High Cycle Fatigue Regime
International Journal of Fatigue, vol. 28, no. 11, pp. 1590-1602, 2006

BAYRAKTAR E., ANTOLONOVICH S., BATHIAS C.
Manufacturing and study of damage mechanism of wooden plastic matrix composites
Journal of Achievements in Materials and Manufacturing Engineering, vol. 14, no. 1-2, pp. 72-78, 2006

BAYRAKTAR E., ANTOLONOVICH S., BATHIAS C.
Multiscale observation of fatigue behviour of elastomeric matrix and metal matrix composites by x-ray tomography
International Journal of Fatigue, vol. 28, pp. 1322-1333, 2006

BAYRAKTAR E., KAPLAN D.
Parametric Approach Model for Determining the Welding Conditions: Welding Limit Diagrams (WLD) II
Journal of Materials Processing Technology, vol. 172, no. 2, pp. 208-217, 2006

WAGNER D., RANC N., XUE H., BAYRAKTAR E.
Thermographic analysis of industrial materials during gigacycle fatigue tests
International Journal of Fatigue and fracture of structures, vol. 29, no. 6, pp. 573-580, 2006

BAYRAKTAR E., ISAC N., ARNAULT G.
An experimental study on the forming parameters of deep drawable steel sheets in automotive industry
Journal of Materials Processing Technology, vol. 162-163, pp. 471-476, 2005

BAYRAKTAR E., ISAC N., ARNAULT G.
Buckling Limit Diagrams (BLD) of Interstitial Free Steels (IFS): Comparison of experimental and finite element analysis
Journal of Materials Processing Technology, vol. 164-165, pp. 1487-1494, 2005

BAYRAKTAR E., KAPLAN D.
Parametric Approach Model for Determining the Welding Conditions: Welding Limit Diagrams (WLD) I
Journal of Materials Processing Technology, vol. 170, pp. 477-486, 2005

BAYRAKTAR E., CHEVALIER J.
A preliminary study on the grain refinement in ultra low carbon steels by cyclic heat treatment
Solid State Transformation and Heat Treatment, vol. 1, pp. 181-188, ed. A. Hazotte, Weinheim, 2004
3-527-31007-X - Wiley-VCH

BAYRAKTAR E., KAPLAN D., GRUMBACH M.
Application of Impact tensile testing to the Spot welded Sheets
Journal of Materials Processing Technology, vol. 153, pp. 80-86, 2004

BAYRAKTAR E., KAPLAN D., BUIRETTE C., GRUMBACH M.
Application of Impact tensile testing to the welded Thin Sheets
Journal of Materials Processing Technology, vol. 145, no. I, pp. 27-39, 2004

BAYRAKTAR E., KHALID F., LEVAILLANT C.
Deformation Behaviour and Fracture study of High Manganese Austenitic Steel
Journal of Materials Processing Technology, vol. 147, no. II, pp. 145-154, 2004

BAYRAKTAR E., MOIRON J., KAPLAN D.
Effect of welding conditions on the formability characteristics of thin sheet steels; mechanical and metallurgical effects
Journal of Materials Processing Technology, 2004

BAYRAKTAR E., KAPLAN D., HUGELE D., JANSEN J.
Evaluation of Pipe Line LASER Girth Weld Properties by Charpy and Impact Tensile Tests
Journal of Materials Processing Technology, vol. 147, no. II, pp. 155-162, 2004

BAYRAKTAR E., KAPLAN D.
Mechanical and Metallurgical Investigation of Martensite-Austenite (M-A) Constituents in Simulated Welding Conditions
Journal of Materials Processing Technology, vol. 153, pp. 87-92, 2004

BAYRAKTAR E., MONTEMBAULT F., BATHIAS C.
Multiscale Observation of Polymer Materials in order to explain Mechanical Behaviour and Damage Mechanism by x-ray Computed Tomography
Journal of Materials Science and Technology, vol. 20, no. 1, pp. 27-31, 2004

BAYRAKTAR E., BATHIAS C., XUE H., HAO T.
On the Giga Cycle Fatigue Behaviour of Ti-Al Alloy
International Journal of Fatigue, vol. 26, no. 2, pp. 1263-1275, 2004

BAYRAKTAR E., ALTINTAS S.
Some Problems in Steel Sheet Forming Processes
Journal of Materials Processing Technology, vol. 80-81, pp. 83-89, 1998

BAYRAKTAR E., ALTINTAS S.
Square Cup Deep Drawing and 2-D Draw Bending Analysis of Hadfield Steel
Journal of Materials Processing Technology, vol. 60, no. 1-4, pp. 183-190, 1996

BAYRAKTAR E., LEVAILLANT C., ALTINTAS S.
Formability Caracterization of Hadfield Steel
Journal of Materials Processing Technology, vol. 47, no. 1-2, pp. 13-31, 1994

BAYRAKTAR E., LEVAILLANT C., ALTINTAS S.
Strain Rate and Temperature Effect on the Deformation Behaviour of the Original Hadfield Steel
Journal de Physique IV, vol. 3, pp. 61-66, 1993

BAYRAKTAR E.
Improvements of Power Plant Efficiency by Applying New Technologies
Journal of Engineer and Machine/Istanbul, vol. 363, pp. 11-17, 1990

BAYRAKTAR E.
Brittleness Problem During Tempering
Journal of Engineer and Machine/Istanbul, vol. 351, pp. 5-7, 1989

BAYRAKTAR E.
Methods of Galvanized Coating
Journal of Engineer and Machine/Istanbul, vol. 355, pp. 24-29, 1989

• Livres et chapitres de livres

F. Gatamorta, E. Bayraktar, M. H. Robert,
Preliminary Study on the Production of Open Cells Aluminum Foam by Using Organic Sugar as Space Holders,
Composite, Hybrid, and Multifunctional Materials, , vol. 4, no. Chapter 2, pp. 7-13, ed. Springer Link, 2015
ISBN: 978-3-319-06991-3 (Print) 978-3-319-06992-0 (Online)

D. Zaimova, E. Bayraktar, I. Miskioglu, D. Katundi, N. Dishovsky
Study of Influence of SiC and Al2O3 as Reinforcement Elements in Elastomeric Matrix Composites,
Composite, Hybrid, and Multifunctional Materials, , vol. 4, no. Chapter 17, pp. 129-138, ed. Springer Link, 2015
ISBN: 978-3-319-06991-3 (Print) 978-3-319-06992-0 (Online)

D. Zaimova, E. Bayraktar, I. Miskioglu, D. Katundi, N. Dishovsky
Manufacturing of New Elastomeric Composites: Mechanical Properties, Chemical and Physical Analysis
Composite, Hybrid, and Multifunctional Materials, , vol. 4, no. Chapter 18, pp. 139-150, ed. Springer Link, 2015
ISBN: 978-3-319-06991-3 (Print) 978-3-319-06992-0 (Online)

E. Bayraktar, M.-H. Robert, I. Miskioglu, A. Tosun Bayraktar
Mechanical and Tribological Performance of Aluminium Matrix Composite Reinforced with Nano Iron Oxide,
Composite, Hybrid, and Multifunctional Materials, , vol. 4, no. Chapter 23, pp. 185-192, ed. Springer Link, 2015
ISBN: 978-3-319-06991-3 (Print) 978-3-319-06992-0 (Online)

L.-M.-P. Ferreira, E. Bayraktar, M.-H. Robert, and I. Miskioglu
Optimization of Magnetic and Electrical Properties of New Aluminium Matrix Composite Reinforced with Magnetic Nano Iron Oxide (Fe3O4)
Mechanics of Composite and Multifunctional Materials, Springer-USA, vol. 7, no. 1, pp. 11-18, ed. Kristin B. Zimmerman, Springer-USA, 2015
ISBN 978-3-319-21761-1

E. Bayraktar, M.-H. Robert and I. Miskioglu
Design of Al-Nb2Al Composites through Powder Metallurgy
Mechanics of Composite and Multifunctional Materials, Springer-USA, vol. 7, no. 1, pp. 131-139, ed. Kristin B. Zimmerman, Springer-USA, 2015
ISBN 978-3-319-21761-1

M.H. Robert, E.M. Nascimento, and E. Bayraktar
Influence of Heat Treatments on Microstructure and Mechanical Behaviour of Compressible Al Matrix, Low Density Composites
Mechanics of Composite and Multifunctional Materials, Springer-USA, vol. 7, no. 1, pp. 141-148, ed. Kristin B. Zimmerman, Springer-USA, 2015
ISBN 978-3-319-21761-1

E. Bayraktar, I. Miskioglu, and D. Zaimova
Low-Cost Production of Epoxy Matrix Composites Reinforced with Scarp Rubber, Boron, Glass Bubbles and Alumina
Mechanics of Composite and Multifunctional Materials, Springer-USA, vol. 7, no. 1, pp. 163-172, ed. Kristin B. Zimmerman, Springer-USA, 2015
ISBN 978-3-319-21761-1

D. Zaimova, E. Bayraktar, and I. Miskioglu
Characteristics of Elastomeric Composites Reinforced with Carbon Black and Epoxy
Mechanics of Composite and Multifunctional Materials, Springer-USA, vol. 7, no. 1, pp. 191-201, ed. Kristin B. Zimmerman, Springer-USA, 2015
ISBN 978-3-319-21761-1

H-A. Alhas, E. Bayraktar, C. Nizam, and J. Khalil
Process Optimization by Direct Integration of the RFID Chips during the manufacturing of the composite parts used in aeronautical engineering
Experimental Mechanics of Composite, Hybrid, and Multifunctional Materials, Springer link (http:\\www.springer .com), vol. 6, , no. 21, pp. 1-11, ed. G.P. Tandon et al. (Eds.), 2014
(go to journal)

D. Zaimova, E. Bayraktar, I. Miskioglu, and N. Dishovsky
Optimization and Service Life Prediction of Elastomeric Based Composites Used in Manufacturing Engineering
Experimental Mechanics of Composite, Hybrid, and Multifunctional Materials, Springer publication Springer link (http:\\www.springer .com), vol. 6, no. 18, pp. 1-13, ed. G.P. Tandon et al. (Eds.), 2014
(go to journal)

Emin Bayraktar, Diana Zaimova, Ming Jen Tan, and Ibrahim Miskioglu
Design of Multifunctional Energetic Structural Composites: A Preliminary Study on an Epoxy-Rubber Matrix with Exothermic Mixture Reinforcements
Experimental Mechanics of Composite, Hybrid, and Multifunctional Materials, Springer publication Springer link (http:\\www.springer .com), vol. 6, no. 7, pp. 1-13, ed. G.P. Tandon et al. (Eds.), 2014
(go to journal)

D. Zaimova, E. Bayraktar, I. Miskioglu, and N. Dishovsky
Manufacturing and Damage Analysis of Epoxy Resin-Reinforced Scrap Rubber Composites for Aeronautical Applications
Experimental Mechanics of Composite, Hybrid, and Multifunctional Materials, Springer publication Springer link (http:\\www.springer .com),, vol. 6, no. 9, pp. 1-15, ed. G.P. Tandon et al. (Eds.),, 2014
(go to journal)

E. Bayraktar, D. Katundi, A. Guinault, A. Kosecki, A. Larbi
Low Velocity Impact Behaviour of the Epoxy Matrix Composites Reinforced with Metallic and Oxide Particles
Dynamic Behavior of Materials, vol. 1, no. 1, pp. 481-488, ed. Springer, 2013

D. Zaimova, E. Bayraktar, G. Berthout and N. Dishovsky
Design of New Elastomeric Matrix Composites: Comparison of Mechanical Properties and Determining Viscoelastic Parameters via Continuous Micro Indentation
Composite Materials and Joining Technologies for Composites, vol. 7, no. 1, pp. 227-234, ed. Springer, 2013

M.-H. Baccar, E. Bayraktar, T. Rickert, M. Boujelbene, D. Katundi
Experimental Study of High Speed Ball End Milling of Titanium Alloy (Ti-6Al-4V)
Experimental and Applied Mechanics, Springer link, vol. Volume 4,, pp. 191-201, ed. Carlos E. Ventura, 2013
ISBN: 978-1-4614-4225-7

M. H. Robert, L. M. P. Ferreira, A. F. Jorge, E. Bayraktar
Production of Metal Matrix Composites Using Thixoinfiltration Techniques
Experimental and Applied Mechanics, Springer link,, vol. 4, pp. 157-164 , ed. Carlos E. Ventura, 2013
ISBN: 978-1-4614-4225-7

Durata. Katundi, Emin Bayraktar and Feyza Ayari
Experimental and Finite Element Analysis (FEM) of Bio-Composite Ceramics,
Experimental and Applied Mechanics, vol. 6, no. 1, pp. 13-20, ed. Springer link (http://www.springer.com), 2011
(go to journal)

Emin Bayraktar, Durata. Katundi, Feyza Ayari, Jean Pierre Chevalier and Frederic Bonnet
Damage Analysis of the Ceramic Reinforced Steel Matrix Composites Sheets: Experimental and Numerical Study
Time Dependent Constitutive Behavior and Fracture/Failure Processes, vol. 3, pp. 85-92, ed. Springer link (http://www.springer.com), 2011
(go to journal)

Fayza Ayari and Emin Bayraktar
Parametric Study on the Optimization of Aluminium Shell Structure Under Various Condidions4/!>
Experimental and Applied Mechanics, vol. 6, pp. 439-450, ed. Springer link (http://www.springer.com), 2011
(go to journal)

• Communications dans des colloques internationaux

Rodolfo Leibholz, Maria Helena Robert, Henrique Leibholz, Emin Bayraktar
Development of Functionally Graded Nodular Cast Iron Reinforced with Recycled WC Particles
SEM,-USA, Experimental Mechanics, Annual Conference, vol. 1, no. 1, pp. 1-8, ed. K. Zimmerman, SEM-Springer Link, USA-2016, 2016

. M. P. Ferreira, I. Miskioglu, E. Bayraktar, D. Katundi
Mechanical and Tribological Properties of Scrap Rubber Reinforced with Al2O3 Fiber, Aluminium and TiO2
SEM,-USA, Experimental Mechanics, Annual Conference, vol. 1, no. 1, pp. 1-8, , 2016., vol. 1, no. 1, pp. 1-8, ed. ed. K. Zimmerman, SEM-USA-2016, 2016

L. F. P. Ferreira, E. Bayraktar, M.H. Robert, I. Miskioglu
Recycling of Scrap Aluminium (AA7075) Chips for Low Cost Composites
SEM, Springer Link-USA, Experimental Mechanics, Annual Conference, 2016, vol. 1, no. 1, pp. 1-9, ed. K. Zimmerman, SEM-Springer Link, USA-2016, 2016

L. F. P. Ferreira, E. Bayraktar, M.H. Robert, I. Miskioglu
Particles Reinforced Scrap Aluminum Based Composites by Combined Processing Sintering + Thixoforging
SEM, Springer Link-USA, Experimental Mechanics, Annual Conference, 2016, vol. 1, no. 1, pp. 1-7, ed. K. Zimmerman, SEM-Springer Link, USA-2016, 2016

L. F. P. Ferreira, E. Bayraktar, I. Miskioglu, MH. Robert
Recycle of Aluminium (A356) for Processing of New Composites Reinforced with Magnetic Nano Iron Oxide and Molybdenum
SEM, Springer Link-USA, Experimental Mechanics, Annual Conference, 2016, vol. 1, no. 1, pp. 1-10, ed. K. Zimmerman, SEM-Springer Link, USA-2016, 2016

D. Zaimova, L-M.P. Ferreira, E. Bayraktar, I. Miskioglu
Scrap Rubber Based Composites Reinforced with Ceramic Oxides and Silica
SEM, Springer Link-USA, Experimental Mechanics, Annual Conference, 2016, vol. 1, no. 1, pp. 1-8, ed. K. Zimmerman, SEM-Springer Link, USA-2016, 2016

L. M. P. Ferreira, I. Miskioglu, E. Bayraktar, M.H. Robert
Aluminium Matrix Composites Reinforced by Nano Fe3O4 doped with TiO2 by Thermomechanical Process
SEM, Springer Link-USA, Experimental Mechanics, Annual Conference, 2016, vol. 1, no. 1, pp. 1-10, ed. K. Zimmerman, SEM-Springer Link, USA-2016, 2016

M. P. Ferreira, I. Miskioglu, E. Bayraktar, D. Katundi
Mechanical and Tribological Properties of Scrap Rubber Reinforced with Glass Fiber and TiO2
SEM, Springer Link-USA, Experimental Mechanics, Annual Conference, 2016, vol. 1, no. 1, pp. 1-8, ed. K. Zimmerman, SEM-Springer Link, USA-2016, 2016

L. M. P. Ferreira, F. Gatamorta, E. Bayraktar, M.H. Robert,
Manufacturing of Low Cost Composites with Porous Structures from Scrap Aluminium (AA2014) Chips
SEM, Springer Link-USA, Experimental Mechanics, Annual Conference, 2016, vol. 1, no. 1, pp. 1-9, ed. K. Zimmerman, SEM-Springer Link, USA-2016, 2016

L. M. P. Ferreira, D. Katundi, E. Bayraktar, I. Miskioglu
Design of Hybrid Composites from Scrap Aluminum Bronze Chips
SEM, Springer Link-USA, Experimental Mechanics, Annual Conference, 2016, vol. 1, no. 1, pp. 1-12, ed. K. Zimmerman, SEM-Springer Link, USA-2016, 2016

A. Kursun, L.M. P. Ferreira, E. Bayraktar, I. Miskioglu
Design of Hybrid Composites from Scrap Aluminum Reinforced with (SiC+TiO2+Gr+Ti+B)
SEM, Springer Link-USA, Experimental Mechanics, Annual Conference, 2016, vol. 1, no. 1, pp. 1-9, ed. K. Zimmerman, SEM-Springer Link, USA-2016, 2016

L-M-P. Ferreira, E. Bayraktar, M-H. Robert, I. Miskioglu
Optimization of Magnetic and Electrical Properties of New Aluminium Matrix Composite reinforced with Magnetic Nano Iron Oxide
SEM 2015 - Experimental and Applied Mechanics, Costa Mesa, CA-USA, June 8-11, 2015, ed. SEM-Springer Link, 2015

D. Zaimova, E. Bayraktar, I. Miskioglu, D. Katundi, N. Dishovsky
Characteristics of recycled elastomeric composites reinforced with carbon black and epoxy
SEM 2015 - Experimental and Applied Mechanics, Costa Mesa, CA-USA, June 8-11, 2015, ed. SEM-Springer Link, 2015

E. Bayraktar, M-H. Robert, I. Miskioglu, D. Katundi
Design of Aluminium-Niobium Aluminate Composites through Combined Method of Powder Metallurgy and Thixoforming process
SEM 2015 - Experimental and Applied Mechanics, Costa Mesa, CA-USA, June 8-11, 2015, ed. SEM-Springer Link, 2015

I. Miskioglu, D. Zaimova, E. Bayraktar, D. Katundi
Low-Cost Production of Epoxy Matrix Composites reinforced with Scrap Rubber, Boron and Alumina
SEM 2015 - Experimental and Applied Mechanics, Costa Mesa, CA-USA, June 8-11, 2015, ed. SEM-Springer Link, 2015

M.H. Robert, E. M. Nascimento, E. Bayraktar
Influence of heat treatment on mechanical behaviour of compressible al matrix, low density composites
SEM 2015 - Experimental and Applied Mechanics, Costa Mesa, CA-USA, June 8-11, 2015, ed. SEM-Springer Link, 2015

L. M. P. Ferreira, D. Katundi, E. Bayraktar, M. H. Robert
Design and properties of damping aluminium matrix composites discontinuously reinforced with particle and fibre
AMPT, 18th Annual International Conference: Advanced Materials Processing Technologies, 14-17 December 2015, Leganes, University of Carlos III Madrid-SPAIN, vol. 1, no. 1, pp. 1-8, ed. S. HASHMI-AMPT/Taylor & Francis-USA, 2015

L. M. P. Ferreira, E. Bayraktar, M. H. Robert 1, I. Miskioglu
Effect of the reinforcement particles on the microstructure and electrical properties of aluminium matrix composites
AMPT, 18th Annual International Conference: Advanced Materials Processing Technologies, 14-17 December 2015, Leganes, University of Carlos III Madrid-SPAIN, vol. 1, no. 1, pp. 1-10, ed. S. HASHMI-AMPT/Taylor & Francis-USA, 2015

D. Katundi, L. M. P. Ferreira, E. Bayraktar, M. H. Robert
Design and microstructural evolution, mechanical and physical properties of fine particles reinforced aluminium matrix composites
AMPT, 18th Annual International Conference: Advanced Materials Processing Technologies, 14-17 December 2015, Leganes, University of Carlos III Madrid-SPAIN, vol. 1, no. 1, pp. 1-10, ed. S. HASHMI-AMPT/Taylor & Francis-USA, 2015

MF. Viana, E. Bayraktar, M.-H. Robert
Structure Analysis of Graded AA2011 / Al2O3 / SiO2 Composites Produced by Thixoforming
AMPT, 18th Annual International Conference: Advanced Materials Processing Technologies, 14-17 December 2015, Leganes, University of Carlos III Madrid-SPAIN, vol. 1, no. 1, pp. 1-8, ed. S. HASHMI-AMPT/Taylor & Francis-USA, 2015

A. Kursun, E. Bayraktar, M.-H. Robert and I. Miskioglu
Design of Al-Nb2Al Composites through Combined Method of Powder Metallurgy and Thixoforming
AMPT, 18th Annual International Conference: Advanced Materials Processing Technologies, 14-17 December 2015, Leganes, University of Carlos III Madrid-SPAIN, vol. 1, no. 1, pp. 1-8, ed. S. HASHMI-AMPT/Taylor & Francis-USA, 2015

L. M. P. Ferreira, , I. Miskioglu, E. Bayraktar, M. H. Robert
Influence of nano particulate and fibre reinforcements on the wear response of multiferroïques composites processed by powder metallurgy
AMPT, 18th Annual International Conference: Advanced Materials Processing Technologies, 14-17 December 2015, Leganes, University of Carlos III Madrid-SPAIN, vol. 1, no. 1, pp. 1-10, ed. S. HASHMI-AMPT/Taylor & Francis-USA, 2015

L.-M.-P. Ferreira, E. Bayraktar, M.-H. Robert, and I. Miskioglu
Design and physical properties of multifunctional-structural composites reinforced with nanoparticles for aeronautical applications
AMPT, 18th Annual International Conference: Advanced Materials Processing Technologies, 14-17 December 2015, Leganes, University of Carlos III Madrid-SPAIN, vol. 1, no. 1, pp. 1-10, ed. S. HASHMI-AMPT/Taylor & Francis-USA, 2015

I. Miraoui, M. Boujelbene and E. Bayraktar
Analysis of Laser Cutting Process Using of Experimental Design
AMPT, 18th Annual International Conference: Advanced Materials Processing Technologies, 14-17 December 2015, Leganes, University of Carlos III Madrid-SPAIN, vol. 1, no. 1, pp. 1-6, ed. S. HASHMI-AMPT/Taylor & Francis-USA, 2015

M. H. Robert, E. Bayraktar, D. Kramar, J. Kopac
NEW TRENDS ON THIXOFORMING: NOVEL APPLICATIONS AND PRODUCTS
9th International Conference on Industrial Tools and Material Processing Technologies, Ljubljana, Slovenia, (9-11April 2014), vol. 1, no. 1, pp. 1-4, ed. Aleš Hančič: Slovenian Tool and Die Development Centre, 2014

Everton M. NASCIMENTO, E. BAYRAKTAR, Maria Helena ROBERT
Influence of Heat Treatment on Impact crash behaviour of compressible Al Matrix-low density composites (Semi solid Processsing)
ECCM-European Conference on Composites Materials, 22-26 June 2014, Sevilla/Spain, vol. 1, pp. 1-8, ed. ECCM-steering committee, 2014

Lygia FERREIRA, Maria Helena ROBERT, Emin BAYRAKTAR
Effect of Operational Parameters in the semi-solid Processing of Al/SiC from Machining Chips
ECCM-European Conference on Compistes Materials, 22-26 June 2014, Sevilla/Spain, vol. 1, pp. 1-8, ed. ECCM-steering committee, 2014

Lygia FERREIRA, Maria Helena ROBERT, Emin BAYRAKTAR
Production of Al/SiC/NiAl2O4 MM-Composites by Thixoforming of recycled Chips
ECCM-European Conference on Composites Materials, 22-26 June 2014, Sevilla/Spain, vol. 1, pp. 1-8, ed. ECCM-steering committee, 2014

D. Zaimova, E. Bayraktar, I. Miskioglu, D. Katundi, N. Dishovsky
Manufacturing and Mechanical Properties of Elastomeric Composites: Chemical and Physical Analysis
SEM-2014: SEM International Conference on Experimental & Applied Mechanics, vol. 1, no. 1, pp. 1-8, ed. Springer-SEM-Bethel, CT 06801-1405 USA, 2014

D. Zaimova, E. Bayraktar, I. Miskioglu, D. Katundi, N. Dishovsky,
Study of Influence of SiC and Al2O3 as Reinforcement Elements in Elastomeric Matrix Composites
SEM-2014: SEM International Conference on Experimental & Applied Mechanics, Greenville, SC USA, June 2-5, 2014, vol. 1, no. 1, pp. 1-12, ed. Springer-SEM-Bethel, CT 06801-1405 USA, 2014

E. Bayraktar, I. Miskioglu, M.H. Robert, M.J. Tan,
Mechanical and tribological performance of aluminium matrix composite reinforced with nano iron oxide (Fe3O4)
SEM-2014: SEM International Conference on Experimental & Applied Mechanics, Greenville, SC USA, June 2-5, 2014, vol. 1, no. 1, pp. 1-8, ed. Springer-SEM-Bethel, CT 06801-1405 USA, 2014

F. Gatamorta, E. Bayraktar, M.H.R Robert,
Investigation on Production of Open Cells Al Foam by Using Organic Sugar as Space Holders
SEM-2014 SEM International Conference on Experimental & Applied Mechanics, Greenville, SC USA, June 2-5, 2014, vol. 1, no. 1, pp. 1-8, ed. Springer-SEM-Bethel, CT 06801-1405 USA, 2014

FERREIRA, Lygia Maria Policarpio, ROBERT, Maria Helena, BAYRAKTAR, Emin
Production of Aluminum Metal Matrix Composites by Thixoforming of Recycled Chips reinforced with SiC and Nickel Aluminate intermetallic: Aeronautical Applications
International Conference: Semi-Solid Processing of Alloys & Composites XIII, S2P-2014, pp. 1-7, Muscat-Oman, , vol. I, no. 1, pp. 1-7, ed. Ed. M. Modigell, German University of Technology in Oman, 2014
ISSN 1012-0394

F. Ayari, E. Bayraktar, M. Boujelbene
Identification of constitutive laws for rubber materials: A numerical study,
AMPT, 17th Annual International Conference: Advanced Materials Processing Technologies, 16-20th November 2014, Atlantis the PALM, Dubai-UAE, ed. S. Hashmi-Taylor& Francis-AMPT-DCU-Dublin-Irlande, 2014

H - A. Alhas, E. Bayraktar, M. Zolghadri and C Nizam
Process excellence by embedding of Radio Frequency Identification (RFID) Tag in the production of composite parts in aeronautical engineering
AMPT, 17th Annual International Conference: Advanced Materials Processing Technologies, 16-20th November 2014, Atlantis the PALM, Dubai-UAE, ed. S. Hashmi-Taylor& Francis-AMPT-DCU-Dublin-Irlande, 2014

Imed Miraoui, Mohamed Boujelbene, Emin Bayraktar
Analysis of Cut Surface Quality of Sheet Metals Obtained by Laser Machining: Thermal Effects
AMPT, 17th Annual International Conference: Advanced Materials Processing Technologies, 16-20th November 2014, Atlantis the PALM, Dubai-UAE, ed. S. Hashmi-Taylor& Francis-AMPT-DCU-Dublin-Irlande, 2014

D. Zaimova, E. Bayraktar, D. Katundi, N. Dishovsky
Study of the influence of SiC and Al2O3 as reinforcement elements in new design of elastomeric matrix composites
AMPT, 17th Annual International Conference: Advanced Materials Processing Technologies, 16-20th November 2014, Atlantis the PALM, Dubai-UAE, 2014

D. Zaimova, E. Bayraktar, I. Miskioglu
Multifunctional Energetic Structural Composites: Epoxy-Rubber Matrix with Nickel Aluminum Reinforcements
AMPT, 17th Annual International Conference: Advanced Materials Processing Technologies, 16-20th November 2014, Atlantis the PALM, Dubai-UAE, 2014

F. Gatamorta, E. Bayraktar, M.H. Robert
Low cost manufacturing of aluminium-alumina composites: processing, microstructural aspects and properties
AMPT, 17th Annual International Conference: Advanced Materials Processing Technologies, 16-20th November 2014, Atlantis the PALM, Dubai-UAE, 2014

L-M-P. Ferreira, E. Bayraktar, M-H. Robert
Magnetic and Electrical Properties of Aluminium Matrix Composite reinforced with Magnetic Nano Iron Oxide
AMPT, 17th Annual International Conference: Advanced Materials Processing Technologies, 16-20th November 2014, Atlantis the PALM, Dubai-UAE, ed. S. Hashmi-Taylor& Francis-AMPT-DCU-Dublin-Irlande, 2014

D. Zaimova, D. Katundi, E. Bayraktar, I. Miskioglu
Multifunctional Energetic Structural Composites: Epoxy-Rubber Matrix with Nickel Aluminum Reinforcements
AMPT, 17th Annual International Conference: Advanced Materials Processing Technologies, 16-20th November 2014, Atlantis the PALM, Dubai-UAE, 2014, 2014

H - A. Alhas, E. Bayraktar, C. Nizam and J. Khalil
Process optimization by direct integration of the RFID chips during the manufacturing of the composite parts used in aeronautical engineering
SEM-2013, Annual Conference - Experimental and Applied Mechanics, The Westin Lombard Yorktown Center Lombard, IL, June 3-5, 2013 , vol. 1, pp. 1-8, ed. SEM/Springer-Link, 2013

S.L. URTIGA, Maria Helena ROBERT, Emin BAYRAKTAR
Processing of Composites in Aluminum-Transition Metals Alumines Systems
SEM-2013, Annual Conference - Experimental and Applied Mechanics, The Westin Lombard Yorktown Center Lombard, IL, USA, June 3-5, 2013 , vol. 1, no. 1, pp. 1-8, ed. SEM/Springer-Link, 2013

D. Zaimova, E. Bayraktar, ; I. Miskioglu, N. Dishovsky,
Optimization and Service Life Prediction of Elastomeric Based Composites Used in Manufacturing Engineering
SEM-2013, Annual Conference - Experimental and Applied Mechanics, The Westin Lombard Yorktown Center Lombard, IL, June 3-5, 2013 , vol. 1, no. 1, pp. 1-9, ed. SEM/Springer-Link, 2013

D. Zaimova, E. Bayraktar, M.J. Tan, I. Miskioglu, D. Katundi
Design of Multifunctional Energetic Structural Composites: A Preliminary Study on an Epoxy-Rubber Matrix With Exothermic Mixture Reinforcements
SEM-2013, Annual Conference - Experimental and Applied Mechanics, The Westin Lombard Yorktown Center Lombard, IL, USA, June 3-5, 2013 , vol. 1, no. 1, pp. 1-8, ed. SEM/Springer-Link, 2013

D. Zaimova, E. Bayraktar, I. Miskioglu, N. Dishovsky, D. Katundi
Epoxy Resin Reinforced Scrap Rubber Composites Used for Aeronautical Applications
SEM-2013, Annual Conference - Experimental and Applied Mechanics, The Westin Lombard Yorktown Center Lombard, IL, June 3-5, 2013 , vol. 1, no. 1, pp. 1-9, ed. SEM/Springer-Link, 2013

H - A. Alhas, E. Bayraktar, C Nizam and J. Khalil
Damage Analysis of composites integrated with RFID chip used in aeronautics
JAMME-2013, International-Annual Conference of WAMME(Academy of Science), Krakow-Poland, 23-26 June 2013 , vol. 1, no. 1, pp. 1-9, ed. WAMME-JAMME, 2013
ISSN 1734-8412

D. Zaimova, E. Bayraktar, D. Katundi, N. Dishovsky
Study of the influence of SiC and Al2O3 as reinforcement elements in elastomeric matrix composites
JAMME-2013, International-Annual Conference of WAMME(Academy of Science), Krakow-Poland, 23-26 June 2013 , vol. 1, no. 1, pp. 1-9, ed. WAMME-JAMME, 2013
ISSN 1734-8412

E. Bayraktar, F. Ayari, D. Katundi, A-T. Bayraktar
Manufacturing of low cost bioceramic composites: experimental and finite element analysis
JAMME-2013, International-Annual Conference of WAMME(Academy of Science), Krakow-Poland, 23-26 June 2013 , vol. 1, no. 1, pp. 1-9, ed. WAMME-JAMME, 2013
ISSN 1734-8412

E. Bayraktar, A. Tosun Bayraktar, M-J-M. Tan, D. Katundi
Multicycle Microindentation at Constant Load of Aluminium Matrix Composite reinforced with Nano Iron Oxide (Fe3O4)
AMPT-2013, International Conference on materials processing and technologies, Taipei-Taiwan, 23-26 September 2013, vol. 1, pp. 1-8, ed. AMPT/S-Hashmi-DCU-Ireland, 2013

Lygia Maria Policarpio Ferreira, Maria Helena Robert, Emin Bayraktar, Diana Zaimova
New design of aluminium based composites through combined method of powder metallurgy and thixoforming
AMPT-2013, International Conference on materials processing and technologies, Taipei-Taiwan, 23-26 September 2013, vol. 1, pp. 1-8, ed. AMPT/S-Hashmi-DCU-Ireland, 2013

Diana Zaimova, Emin Bayraktar, Dhurata Katundi, Nikolay Dishovsky
Investigation of Wear Behaviour of Rubber Based Composites by Continuous Multi-Cycle Indentation
AMPT-2013, International Conference on materials processing and technologies, Taipei-Taiwan, 23-26 September 2013, vol. 2, pp. 1-8, ed. AMPT/S-Hashmi-DCU-Ireland, 2013

D. Zaimova, E. Bayraktar, M-J. Tan. I. Miskioglu
Processing of epoxy-nickel matrix composites reinforced with aluminum and waste elastomers
AMPT-2013, International Conference on materials processing and technologies, Taipei-Taiwan, 23-26 September 2013, vol. 2, pp. 1-8, ed. AMPT/S-Hashmi-DCU-Ireland, 2013

Diana Zaimova, Emin Bayraktar, Dhurata Katundi, Zehoua Hamouche, Nikolay Dishovsky
New Design of Composite Materials Based on Scrap Rubber Matrix Reinforced with Epoxy and SiC
AMPT-2013, International Conference on materials processing and technologies, Taipei-Taiwan, 23-26 September 2013, vol. 2, pp. 1-8, ed. AMPT/S-Hashmi-DCU-Ireland, 2013

WANG Yongsheng, TAN Ming-Jen, CHUA Beng-Wah, BAYRAKTAR E.
YSZ (yttria-stabilized zirconia)-reinforced Mg-based amorphous composites :
AMPT-2013, International Conference on the advanced materials processing technologies, 23-26 September, 2013, Taiwan, vol. 1, no. 1, pp. 1-8, ed. AMPT/S. HASHMI-DCU-Dublin-2013, 2013

Hongquian Xue, Qian Tao and Emin Bayraktar
Effect of interfrence-fit on fatigue life for composite lap joints
AMPT, 15th International Conference on Materials Processing Technologies, 22-26 September, Taipei,-Taiwan-2013, vol. 1, no. 2, pp. 1-8, ed. s; Hashmi, DCU, Irleland, 2013

M. Zaied, I. Miraoui, M. Boujelbene, E. Bayraktar
Analysis of heat affected zone obtained by CO2 laser cutting of low carbon steel (S235)
AIP Conference Proceedings (American Institute of Physics): 3rd International Advances in Applied Physics and Materials Science, vol. 1569, no. 1, pp. 323-326, ed. A-Y. ORAL, 2013
ISBN: 978-0-7354-1197-5

D. Katundi, F. Ayari, E. Bayraktar*, M-J. Tan and A. Tosun Bayraktar
Design of Aluminium Matrix Composites reinforced with nNano Iron Oxide (Fe3O4)
AMPT, 15th International Conference on "Advanced Materials Processing Technologies", 23-26 September, Australia, Woolongong University, vol. 1, no. 1, pp. 1-12, ed. AMPT-Academy of Science, 2012

M. Zaied, E. Bayraktar*, I. Miraoui, M. Boujelbene, D. Katundi
Experimental study on the laser cutting of low carbon steel (S235)
AMME, International Conference on "Achievements in Mechanical and Materials Engineering" , vol. I, pp. 1-10, ed. WAMME Acdademy of Science, 2012

M. Gazbar, E. Bayraktar, M. Boujelbene, K. Elmeddeb, D. Katundi, H. Kharroubi
A comprehensive study on the laser cutting of steel structures and parametric approach model to predict Heat Affected Zone (HAZ)
AMME, International Conference on "Achievements in Mechanical and Materials Engineering" , vol. 52, no. 1-2, pp. 1-11, 2012

D. Zaimova, E. Bayraktar*, D. Katundi and N. Dishovsky
Design of new Elastomeric Composites used in Manufacturing Engineering
14th International Materials Symposium - IMSP'2012, Pamukkale-Denizli Turkey, vol. 1, pp. 1-13, ed. WAMME Acdademy of Science, 2012

D. Zaimova*, E. Bayraktar, D. Katundi, N. Dishovsky
FILLER PARTICLES AND EPOXY RESIN-REINFORCED ELASTOMERIC BASED COMPOSITES
14th International Materials Symposium - IMSP'2012, Pamukkale-Denizli Turkey, vol. 1, pp. 1-11, ed. WAMME Acdademy of Science, 2012

D. Zaimova, E. Bayraktar*, G. Berthout, N. Dishovsky
Elastomeric matrix composites: Comparison of mechanical properties and determining viscoelastic parameters via continuous micro indentation
SEM, International Conference: Experimental mechanics, vol. 1, ed. SEM, Society of Experimental mechanics, 2012

E. Bayraktar*, D. Katundi, A. Guinault, A. Kosecki, A. Larbi
Low Velocity Impact Behaviour of the Epoxy Matrix Composites reinforced with Metallic and Oxide Particles
SEM, International Conference: Experimental mechanics, vol. 1, pp. 1-7, ed. SEM, Society of Experimental mechanics, 2012

M-H. Baccar, E. Bayraktar, T. Rickert, M. Boujelbene, D. Katundi
Experimental Study of High Speed Ball End milling of Titanium Alloy (Ti-6Al-4V)
SEM, International Conference: Experimental mechanics, vol. 1, pp. 1-13, ed. SEM, Society of Experimental mechanics, 2012

M.H. Robert, L. M. P. Ferreira, A.F.Jorge, E. Bayraktar*
Production of Metal Matrix Composites using Thixinfiltration Techniques
SEM, International Conference: Experimental mechanics, vol. 1, ed. SEM, Society of Experimental mechanics, 2012

D. Zaimova, D. Katundi, E. Bayraktar, N. Dishovsky
Processing Conditions and mechanical and physical properties of Elastomeric matrix composites
International Conference on Achievements in Mechanical and Materials Engineering AMME`2012, 9-12 September, Kolobrzeg-Poland, vol. 1, no. 1, pp. 1-8, ed. WAMME-Academy of Science, 2012

D. Zaimova, E. Bayraktar, D. Katundi, N. Dishovsky
Applications of elastomeric based composites in industrial applications
International Conference on Advanced Materials Processing, AMPT-2012, 23-26- September 2012, Wollongong-Australia, vol. 1, no. 1, pp. 8-16, ed. AMPT-Editions, 2012

N. Ouali, A-C. Oppici, D. Zaimova, E. Bayraktar, D. Katundi
Manufacturing and Damage Analysis of Fibre/Filler Reinforced Epoxy Based Composites
International Conference on Advanced Materials Processing, AMPT-2012, 23-2- September 2012, Wollongong-Australia, vol. 1, no. 1, pp. 1-12, 2012

YS Wang, Ming-Jen Tan, Beng Wah Chua, Bayraktar Emin
Tungstate ion-assisted hydrothermal conversion of magnesium hydroxide coatings on AZ31
AMPT-2012, 15thInternational Conference on Advanced Materials and Processing Technologies, 22-26 September 2012, Wollongong, Australia, vol. 1, pp. 1-8, ed. Kiet Tieu, 2012

Abdel Monem Daymi, Dhurata Katundi, Mohamed Boujelbene and Emin Bayraktar
Surface integrity analysis in high speed machining of complex parts used in medical applications
SEM,Experimental & Applied Mechnaics, vol. 1, no. 2, pp. 333-, ed. SEM, American Metals Society, 2011

F. Ayari, D. Katundi, and E. Bayraktar
Damage of Aluminium Matrix Composite Reinforced with Iron Oxide; Experimental and Numerical Study
American Institute of Physics; Journal, Materials Physics and Applications, vol. 1, no. 1, pp. 27-32, ed. AIP Conference Proceedings 1315, 2011
ISBN 978-0-7354-0871-5

F. Ayari, E. Bayraktar and A. Zghal
Damage of Elastomeric Matrix Composites under Static Loading Conditions: Experimental and Numerical Study
American Institute of Physics; Journal, Materials Physics and Applications, vol. 1, no. 1, pp. 49-54, ed. AIP Conference Proceedings 1315, 2011
ISBN 978-0-7354-0871-5

Z. Belghazi, D. Katundi, F. Ayari, and E. Bayraktar
Design of Natural Hydroxyapatite Biocomposite Ceramics (HAP): Experimental and Numerical Study
American Institute of Physics; Journal, Materials Physics and Applications, vol. 1, no. 1, pp. 235-241, ed. AIP Conference Proceedings 1315, 2011
ISBN 978-0-7354-0871-5

M. M’hamdi, S. BenSalem, M. Boujelbene, D. Katundi, and E. Bayraktar
Effect of Cutting Parameters on the Chip formation in Orthogonal Cutting
American Institute of Physics; Journal, Materials Physics and Applications, vol. 2, no. 1, pp. 1101-1107, ed. AIP Conference Proceedings 1315, 2011
ISBN 978-0-7354-0871-5

J. Liu, M. J. Tan, S. C - Y - Lan, A. E. W. Jarfors, K. S. Fong, and E. Bayraktar
Finite Element Modeling of Superplastic-Like Forming Process with a Non-Isothermal Heating System
American Institute of Physics; Journal, Materials Physics and Applications, vol. 1, no. 1, pp. 377-382, ed. AIP Conference Proceedings 1315, 2011
ISBN 978-0-7354-0871-5

M.HAMDI, M.BOUJELBENE, D.KATUNDI, E.BAYRAKTAR
Study of chip formation in orthogonal cutting; case of hard machining
CIRP Annals: Conference proceedings: Process-Machine Interactions, 10-11 June 2010, University of British Colombia, Vancouver-CANADA, vol. II, ed. CIRP- YUSUF ALTINTAS, 2010

BAYRAKTAR E., KATUNDI D., AYARI F., CHEVALIER J-P, BONNET F.
Weldability and Toughness Evaluation of the Ceramic reinforced steel matrix composites (TiB2-RSMC)
Conference Proceedings: SEM (Society of Experimental Mechanics), International Conference, University of Indianapolis, USA, vol. I, no. 1, pp. 536-544, ed. SEM-USA, 2010

F. AYARI AND E. BAYRAKTAR
Optimization of metal forming processes: Case of Deep Drawing
CIRP Annals:Conference proceedings: Process-Machine Interactions, 10-11 June 2010, University of British Colombia, Vancouver-CANADA,, vol. I, ed. CIRP- YUSUF ALTINTAS, 2010

BAYRAKTAR E., KATUNDI D.
Development of a new aluminum matrix composite reinforced with iron oxide (Fe3O4),
Proceedings; AMME, 18th International Conference on the Materials and Manufacturing Engineering, ZAKOPANE-POLAND, vol. I, no. 1, pp. 1-9, 2010

BAYRAKTAR E., XUE H., AYARI F., BATHIAS C.
Torsional fatigue behaviour and damage mechanisms in the very high cycle regime
Proceedings; AMME, 18th International Conference on the Materials and Manufacturing Engineering, ZAKOPANE-POLAND, vol. I, no. 1, pp. 18-29, ed. L. DOBRZANSKI, 2010

KATUNDI D., TOSUN-BAYRAKTAR A., BAYRAKTAR E., TOUEIX D.
Corrosion study and crash test applications of the welded steels (Tailored welded blanks),
Proceedings; AMME, 18th International Conference on the Materials and Manufacturing Engineering, ZAKOPANE-POLAND,, vol. II, no. 1, pp. 10-18, ed. L. DOBRZANSKI, 2010

F. Ayari, D. Katundi and E. Bayraktar
Damage of Aluminium Matrix Composite reinforced with Iron Oxide: Experimental and Numerical Study
AMPT-2010, Advanced Materials Processing Technologies, Paris, vol. I, no. 1, ed. AMPT-S. HASHMI, 2010

FAYZA Ayari and BAYRAKTAR Emin
Damage of Elastomeric Matrix Composites (EMC-rubbers) Under Static Loading Conditions: Experimental and Numerical Study
AMPT-2010, Advanced Materials Processing technologies, Paris, vol. I, no. 1, ed. AMPT-S. HASHMI, 2010

Z. Belghazi, D. Katundi, F. Ayari and E. Bayraktar
Design of Natural Hydroxyapatite as bio-composite ceramics: Experimental and Numerical Study
AMPT-2010, Advanced Materials Processing technologies, Paris, vol. I, no. 1, ed. AMPT-S. HASHMI, 2010

J. Liu, M-J Tan, S. Castagne, Y. Aue-U-Lan, A. E. W. Jarfors, K-S. Fong, E. Bayraktar
Finite Element Modeling of a Non-Isothermal Superplastic-Like Forming Process
AMPT, Advanced Materials Processing Technologies, vol. 1, no. 1, ed. AMPT - S. HASHMI, 2010

M'Hamdi Baccar, M. Boujelbene, D. Katundi, E. Bayraktar
Experimental study on the effect of cutting parameters in orthogonal cutting
AMPT, Advanced Materials Processing Technologies, vol. 1, no. 1, pp. 334-340, ed. S. HASHMI, 2010

E. Bayraktar, D. Katundi, F. Ayari, Jean Pierre Chevalier, F. Bonnet
Ceramic reinforced steel matrix Composites in Manufacturing Engineering
The 16th Int. Sci. Conference on Mechanics, Manufacturing and Materials Science, CAM3S'2010 - Gliwice, Poland, vol. 1, no. 1, ed. L. A. Dobrzanski, 2010

: BAYRAKTAR Emin, KATUNDI D., CLAEYS J.
Dynamic Behaviour of welded stainless steels used in automotive industry
SEM-2009, session: Dynamic Behaviour of Materials, New Mexico-USA, 1-3 June. (2009)., 2009

KATUNDI D., TOSUN-BAYRAKTAR A., BAYRAKTAR Emin, TOUEIX D.
Corrosion Behaviour of the steel sheets used in automotive industry
SEM-2009, session: Dynamic Behaviour of Materials, New Mexico-USA, 1-3 June. (2009)., 2009

AYARI F., HAMOUCHE Z., BAYRAKTAR E.
A FEM based numerical-experimental study for determining strength properties by micro indentation of the metal matrix composites
AMPT-Advanced Materials Processing technologies, Kuala Lumpur, 26-29 October, Malaysia, vol. 1, no. 1, 2009

BAYRAKTAR E., KAPLAN D., BONNET F.,
A New Type of Crash Test Simulation for welded joints
SEM-2009, session: Dynamic Behaviour of Materials, New Mexico-USA, 1-3 June, 2009

KATUNDI D., TOSUN-BAYRAKTAR A., BAYRAKTAR E., TOUEIX D.,
Corrosion Behaviour of the steel sheets used in automotive industry
SEM-2009, session: Dynamic Behaviour of Materials, New Mexico-USA, 1-3 June, 2009

BAYRAKTAR E., CHEVALIER J.P., CLAEYS J., BONNET F.,
Crash Test Applications for welded joints used in automotive industry
DYAMAT-Bruxel, Sept., 2009

BAYRAKTAR E., KATUNDI D., CLAEYS J.,
Dynamic Behaviour of welded stainless steels used in automotive industry
SEM-2009, session: Dynamic Behaviour of Materials, New Mexico-USA, 1-3 June, 2009

BAYRAKTAR E., CHEVALIER J-P., KAPLAN D., DEVILLERS L.,
Effect of Alloying Elements on the Damage of Interstitial Free Steels
SEM-2009, session: Dynamic Behaviour of Materials, New Mexico-USA, 1-3 June, 2009

BAYRAKTAR E., KATUNDI D., CHEVALIER J-P., BONNET F.,
Manufacturing of Steel Matrix Composites Reinforced by ceramic particles (TiB2): plenary-keynote lecture
AMPT, Advanced materials and processing Technologies, Kuala Lumpur, Malaysia, 26 - 29 October, vol. 1, no. 1, 2009

AYARI F., ZGHAL A, BAYRAKTAR E.
Numerical study of cracked titanium shell under compression
AMPT-Advanced Materials Processing technologies, Kuala Lumpur, 26-29 October, Malaysia, vol. 1, no. 2, 2009

BAYRAKTAR E., KATUNDI D., AYARI F.,CHEVALIER J-P., BONNET F.
Study of Impact Resistance of TiB2 Reinforced Steel Matrix Composites
SEM-2009, session: Dynamic Behaviour of Materials, New Mexico-USA, 1-3 June, 2009

DAYMI A., BOUJELBENE M., LINARES J. M., BAYRAKTAR E.
Surface integrity analyses in high speed inclined milling of the titanium alloy Ti-6Al-4V
TMT2009, 13th International Conference on «Trends in the development of Machinery and Associated technology, 16-21 October, Hammamet, Tunisia, vol. 09, no. 128, 2009

DAYMI A., BOUJELBENE M., BAYRAKTAR E.
Surface roughness of hip prosthesis in high speed turning of Ti-6Al-4V
AMME, 17th International Conference on the Materials and Manufacturing Engineering, GDANSK-POLAND, vol. 1, no. 214, 2009

DAYMI A., BAYRAKTAR E., BOUJELBENE M., KATUNDI D.
The effect of high speed milling on surface integrity of the titanium alloy Ti-6Al-4V
AMPT-Advanced Materials Processing technologies, Kuala Lumpur, 26-29 October, Malaysia, vol. 1, no. 2, 2009

BELARIFI F., BAYRAKTAR E.,
The Tredgold method in reverse engineering to check the assembly of a conical spur gear using CAD
AMPT-Advanced Materials Processing technologies,Kuala Lumpur, 26-29 October, Malaysia, vol. 1, no. 2, 2009

KILICKAP E., BAYRAKTAR E.
Drilling of Aluminium 7075
8th International asia pacific Conference on Materials Processing (APCMP 2008), Guilin-Guangzhou (Popular Republic of China), June 15-19, 2008

DA SILVA BOTELHO T., BAYRAKTAR E., INGLEBERT G.
Experimental and numerical study of natural rubber: Damage criteria of double cantilever beam specimen (DCB) under uniaxial tensile loading conditions
Advances in Materials and Processing Technologies (AMPT-8), Manama (Kingdom of Bahrain), November 2-5, 2008

BAYRAKTAR E., LE GORJU K., BATHIAS C.
Modelling and Experimental Study of the Damage Mechanisms of Rubber Composites under Biaxial Fatigue
Advances in Materials and Processing Technologies (AMPT-8), Manama (Kingdom of Bahrain), November 2-5, 2008

TEBNI W., BOUJELBENE M., BAYRAKTAR E.,
Parametric approach model for determining Electrical Discharge Machining (EDM) conditions: Effect of cutting parameters on the surface integrity
Advances in Materials and Processing Technologies (AMPT-8), Manama (Kingdom of Bahrain), November 2-5, 2008

BAYRAKTAR E., KAPLAN D., DEVILLERS L., CHEVALIER J.-P.
Physical meaning of explosive growing of the ferrite grain in ultra low carbon steels (ULCS) during rapid thermal cycle conditions
Advances in Materials and Processing Technologies (AMPT-8), Manama (Kingdom of Bahrain), November 2-5, 2008

BAYRAKTAR E., KAPLAN D, YILBAS B.S
A comparative study on LASER welded joints: mechanical and metallurgical aspects
Proceedings of 13th International Conference on Experimental Mechanics, 1-6 July Greece, ed. springer, 2007

BAYRAKTAR E., PAWLAK Z, KALDONSKI T, PAI R, OLAYEDE A
A comparative study on the tribological behaviour of the Hexagonal Boron Nitride (h-BN) as Lubricant Nanoparticles - Additive in Porous Sliding Bearings for a Car Clutch
Proceedings of International conference on Advances in Manufacturing engineering, ICAME-2007, Manipal, Karnakata, India, 2007

BAYRAKTAR E., MORA R, GARCIA I, BATHIAS C,
Corrosion, surface and case hardening effects on the fatigue behaviour of mechanical components in giga cycle regime
Proceedings of 4th TMS-Metallurgical Transaction on very high cycle Fatigue-Michigan USA, pp. 303-311, ed. TMS, 2007
978-0-87339-704-9

BAYRAKTAR E., KAPLAN D, SCHMIT F, GRUMBACH M,
Dynamic resistance-crash test of tailored blanks
proceedings of 6th International conference on industrial tools and manufacturing technologies, pp. 205-209, ed. Tecos, 2007
978-961-6692-00-7

BAYRAKTAR E., KAPLAN D, CHEVALIER J.P.
Influence of precipitation on the grain growth mechanism during the welding of Interstitial Free Steels (IFS) –II
Proceedings of 13th International Conference on Experimental Mechanics, 1-6 July Greece, ed. springer, 2007

BAYRAKTAR E., XUE H, BATHIAS C
Manufacturing and damage mechanisms of Ti-Al composites in 3 point ultrasonic bending fatigue
International conference “COMMENT07 in manufacturing engineering, 27-30 May Poland, ed. Elsevier, 2007

DA SILVA BOTELHO T., ISAC N., BAYRAKTAR E.
Modelling of damage initiation mechanism in rubber sheet composites under the static loading
International conference “COMMENT07 in manufacturing engineering, 27-30 May Poland, ed. Elsevier, 2007

CHEVALIER J.P., BAYRAKTAR E., KAPLAN D., DEVILLIERS L
Physical understanding of abnormal growing of the ferrite grain in ultra low carbon steels during rapid thermal cycle conditions
ATS - International Steelmaking Conference, Paris 13-14 December, vol. II (in CD-Rom), ed. ATS, 2007

BAYRAKTAR E., KAPLAN D, GRUMBACH M, PAQUETON H
State of the art of impact tensile test (ITT): its historical development as a simulated crash test of industrial materials
Proceedings of 13th International Conference on Experimental Mechanics, 1-6 July Greece, ed. springer, 2007

DA SILVA BOTELHO T., BAYRAKTAR E., INGLEBERT G.
2D-Draw Bending Analyzing; Comparison of experimental and simulation results of draw-bend springback
Proceedings on AMME-Achievement in mechanical and materials engineering, 4-8 June Gliwice, Poland, 2006

WU T., MO T., CHEN W., BAYRAKTAR E.
Analysis of Plastic Zone of a Circle Crack under Gigacycle Fatigue
Proceedings on fatigue damage of structural materials VI, Hyannis-Boston, 17-22 September, 2006

BAYRAKTAR E., BESSRI K., BATHIAS C.
Damage mechanism in Elastomeric Matrix Composites; Nucleation and Growth and Instability of the Cavitations
Proceedings on 16th European Conference of Fracture, ECF 16, 3 – 7 July Alexandroupolis, Greece, 2006

BAYRAKTAR E., XUE H., BATHIAS C.
Fatigue behaviour of automotive parts in giga cycle regime in torsional sollicitations
Proceedings on 9th International Fatigue conference-Elsevier Atlanta, USA, 15-19 Mai (VHCF-FT 98), 2006

XUE H., BAYRAKTAR E., HAO T.
Gigacycle Fatigue of a Ti-Al intermetallics alloy in bending loading conditions
Proceedings on fatigue damage of structural materials VI, 17-22 September, Hyannis –Boston, 2006

BAYRAKTAR E., ISAC N., ARNAULT G.
An experimental study on the forming parameters of deep drawable steel sheets in automotive industry
Proceedings of AMPT'2005, 16th – 19th May, Gliwice-Wisla, Poland, pp. 57-60, 2005

BAYRAKTAR E., ISAC N., ARNAULT G.
Buckling Limit Diagrams (BLD) of Interstitial Free Steels (IFS): Comparison of experimental and finite element analysis
Proceedings of AMPT'2005, 16th – 19th May, Gliwice-Wisla, Poland, pp. 61-65, 2005

BAYRAKTAR E., BESSRI K., MONTEMBAULT F., BATHIAS C.
Damage Mechanism of Elastomeric Matrix Composites
Proceedings of SEM'2005, 7-9 June, Paper n°353, session 057, Portland Oregon USA, 2005

BAYRAKTAR E., MASOUNAVE J., BATHIAS C.
Damage Mechanism of Metal Matrix Composites
Proceedings of SEM'2005, 7-9 June, Paper n°354, session 057, Portland Oregon USA, 2005

BAYRAKTAR E., ANTOLONOVICH S., BATHIAS C.
Deformation Behaviour and Damage Mechanism of Wooden Plastic Matrix Composites
Proceedings of SEM'2005, 7-9 June, Paper n°88, session 049, Portland Oregon USA, 2005

BAYRAKTAR E., BESSRI K., BATHIAS C.
Deformation behaviour of elastomeric matrix composites under static loading conditions
Euromech-473, Porto, Portugal, 27-29 October, 2005

XUE H.Q., BAYRAKTAR E., BATHIAS C.,
Effect of ultrasonic fatigue specimen geometry on its strain field and heat response
Proceedings on the 11th Int. CAM3S'2005, Gliwice-Zakopane 6th -9th Dec, pp. 1049-1055, 2005

BAYRAKTAR E., BATHIAS C.
New developments in non destructive controls of the composite materials
Euromech-473, Porto, Portugal, 27-29 October, 2005

BAYRAKTAR E., ANTOLONOVICH S., BATHIAS C.
Damage mechanisms under multiaxiale fatigue of composites
Proceedings of ICFC-3, 13 - 15 September, Kyoto, Japan, 2004

BAYRAKTAR E., MARINES I., BATHIAS C.
Failure Mechanism of Automotive Metallic Alloys in Very High Cycle Fatigue Regime
Proceedings of VHCF-3, Kyoto, Japan, pp. 124-131, 2004

BAYRAKTAR E., MONTEMBAULT F., BATHIAS C.
Multiscale observation of polymers in order to explain mechanical behaviour by x-ray tomography,
Proceedings of IFAMST 2004, 4-7 July, Troyes, France, 2004

BAYRAKTAR E., BATHIAS C., XUE H., HAO T.
Very High Cycle Fatigue Behaviour of Ti-Al intermetallic composites
Proceedings of VHCF-3, Kyoto, Japan, pp. 440-444, 2004

BAYRAKTAR E., KAPLAN D., GRUMBACH M.
Application of Impact tensile testing to the Spot welded Sheets
Proceedings of AMPT’03, Dublin, Ireland, pp. 958-961, 2003

BAYRAKTAR E., KAPLAN D., GAUTHIER M., MOIRON J.
Effect of welding conditions on the formability characteristics of thin sheet steels; mechanical and metallurgical effects
Proceedings of AMME’03, Gliwice, Poland, pp. 70-74, 2003

BAYRAKTAR E., CHEVALIER J.
Grain Refinement by thermal cycling, obtaining ultra fine grain low carbon steels
Euromat'2003, International Conference on Advanced Materials and Processes, Lausanne, Switzerland, 1-5 September, 2003

BAYRAKTAR E., KAPLAN D.
Mechanical and Metallurgical Investigation of Martensite-Austenite (M-A) Constituents in Simulated Welding Conditions
Proceedings of AMPT’03, Dublin, Ireland, pp. 962-965, 2003

BAYRAKTAR E., KAPLAN D.
Parametric Approach Model for Determining the Welding Conditions: Welding Limit Diagrams (WLD)
Proceedings of AMPT’03, Dublin, Ireland, pp. 954-957, 2003

BAYRAKTAR E., BECHET J., FERRIERE G., CHEVALIER J.
Repeated phase transformation effects on the grain size of an IF steel
International Conference on the Material Science 2000, 21-25th October, Tours-France, 2002

KAPLAN D., BAYRAKTAR E., HUGELE D., COIFFIER J., JANSEN J.
Evaluation of Pipe Line LASER Girth Weld Properties by Charpy and Impact Tensile Tests
CCC2001, Charpy Centenary Conference, Poitiers, France, 3-5 October, 2001

BAYRAKTAR E.
Experimental Study of Various Parameters in Sheet Metal Forming
Proccedings of AMPT’01, Madrid, Spain, vol. II, pp. 693-700, 2001

BAYRAKTAR E., ALTINTAS S.
Some problems in Formability processes
Conference Proceedings of Metal Forming'98, Birmingham, England, 1998

BAYRAKTAR E., ALTINTAS S.
Square cup deep drawing analysis of Hadfield steel
Conference Proceedings of Metal Forming'96, Krakow, Poland, 1996

BAYRAKTAR E., SAVAS M., ALTINTAS S.
Metallographic Analysis of the Surface Treatment Effects on the Hadfield Steel Sheets
ASM Proceedings of MC'95, Colmar, France, vol. 1, pp. 417-422, 1995

BAYRAKTAR E., LEVAILLANT C., ALTINTAS S.
An Indirect Method of Determining Plastic Deformation Behaviour of Hadfield Steel: Stress Relaxation Experiments
Conference Proceedings of EUROMAT 94, Balatonszeplak, Hungary, vol. III, pp. 879-887, 1994

KHALID F., BAYRAKTAR E., LEVAILLANT C., ALTINTAS S.
Deformation and Work Hardening Behaviour of High Manganese Austenitic Steel
Proceedings of ICEM-13, Paris, France, vol. 1, pp. 35-36, 1994

BAYRAKTAR E., LEVAILLANT C., ALTINTAS S.
Deformation Behaviour of Hadfield Steel
Conference Proceedings of EUROMAT 93, Paris, France, pp. 66-66, 1993

BAYRAKTAR E., ALTINTAS S.
Formability Properties and Microstructural Relationships of Hadfield Steel
Proceedings of 7th. International Metallurgy and Materials Congress, Istanbul, Turkey, vol. 2, pp. 1003-1016, 1993

BAYRAKTAR E., ALTINTAS S.
Square Cup Deep Drawing Experiment
NUMISHEET'93, Isehara, Japan, pp. 623-637, 1993

BAYRAKTAR E., ALTINTAS S.
Two Dimensional Draw Bending Experiment
NUMISHEET'93, Isehara, Japan, pp. 441-466, 1993

• Communications dans des colloques francophones

A Delort 2, M. Laborde 2, L-M-P. Ferreira1, 2, D. Katundi*2, E. Bayraktar
Recycling of Aluminium Chips for Low Cost Composites by Means of Sintered – Forging Processes
Colloque “La métallurgie, quel avenir” RNM, SF2M et Ecole des Mines Saint Etienne, 27 juin au 1er juillet 2016, 2016

A. Kursun1, 2, D. Katundi*1, E. Bayraktar2, I. Miskioglu3
Scrap aluminum based composites reinforced with (Gr, Al2O3, TiC) through combined method of powder metallurgy and thixoforging
Colloque “La métallurgie, quel avenir” RNM, SF2M et Ecole des Mines Saint Etienne, 27 juin au 1er juillet 2016, 2016

L-M-P. Ferreira1, 2, D. Katundi*2, S. Baiz3, E. Bayraktar1, 2,
Silica and TiO2 particles reinforced hybrid composites from scrap aluminum chips
Colloque “La métallurgie, quel avenir” RNM, SF2M et Ecole des Mines Saint Etienne, 27 juin au 1er juillet 2016, 2016

BAYRAKTAR E., MARINES I., BATHIAS C.
Effet de traitement de surface sur la tenue en fatigue gigacyclique d’acier SAE 8620
24ème JPF 2005, SF2M, 10-11 mai, Senlis, France, 2005

BAYRAKTAR E., MARINES I., BIN X., VITTORI J., BATHIAS C.
Etude de la prévision de la fatigue gigacyclique des alliages métalliques par des méthodes statistiques
23èmes JPF, SF2M, Paris, 25 - 26 mai, 2004