ABDUL-LATIF Akrum


Détails :

Statut : Professeur des universités

Habilité à diriger des recherches : oui

Section CNU : 60

Equipe : Tribologie et matériaux
Tél : +33 1 4151 1234
Fax : +33 1 4151 1249
Courriel : aabdul@iu2t.univ-paris8.fr
Adresse : 3, rue Fernand Hainaut - 93407 Saint Ouen

Responsabilités en laboratoire :

► 1996-2002 Equipe de Recherche sur les Besoins en Equipement et en Maintenance (ERBEM), Université Paris 8.
► 2002-2008 Directeur et fondateur du Laboratoire de Mécanique, Matériaux et Modélisation (L3M), JE-2483, Université Paris 8.
► Depuis 9/2009 Responsable de l'equipe de recherche à l'IUT de Tremblay.
► Depuis 9/2009 Responsable et représentant de l’université Paris 8 au LISMMA (Supméca).
► Depuis 09/2009 Responsable du projet ANR: MIMIC (ANR 09-BLAN-0010-01: http://mimic.anr.free.fr/) pour le laboratoire partenaire LISMMA
► Membre du Conseil du Laboratoire

Activités en enseignement :

►► Cours de DUT en Génie Industriel et Maintenance (1ère et 2ème années)
► Mécanique Générale
► Resistance des Matériaux
► Cinématique
► Dynamique
► Technologie et Contrôle des Matériaux-1
► Technologie et Contrôle des Matériaux-2
► Projets Technologiques
:
►► Cours de Master (M1 & M2)
► Comportement anisotrope pour les matériaux composites (2010/2011: Université de Reims Champagne-Ardenne)
► Plasticité-viscoplasticité et Endommagement (2009/2010 : Ecole militaire polytechnique d’Alger)

Activités de recherche :

►► Principaux domaines de recherche
► Comportement élastique-inélastique des matériaux endommageables en utilisant des approches micromécaniques pour les matériaux métalliques et composites (expérience et modélisation),
► Grandes déformations (Système d’Absorption d’Energie),
► Effet de la vitesse de déformation sur le comportement des matériaux,
► Comportement des matériaux à grains ultrafins: Expérience et Modélisation

Responsabilités collectives :

► Collaboration avec des universités étrangères (universités Tizi-Ouzou, Algérie et Ecole supérieure polytechnique, Université d’Antsiranana, Madagascar) : thèses en cotutelle
► Rapporteur et examinateur de plusieurs thèses et HDR
► Guest Editor d’un numéro spécial, (No.1 & 2, vol 16, 2007): International journal of Damage Mechanics
► Rapporteur et Membre du jury d'attribution des subventions SESAME de la Région d’Ile de France (2006)
► Expert scientifique pour l’Association Nationale de la Recherche et de la Technologie.
► Expert : Articles scientifiques pour une douzaine de journaux internationaux (International journal of Damage Mechanics; International journal of Solids and Structures; ASME, journal of Engineering Materials and Technology; International journal of Plasticity; Journal of Mechanics of Materials and Structures; Journal of Materials Processing and Technology; ASM, Journal of Materials Engineering and Performance,.. ) (en moyenne 12 articles par an)
► Expert et Membre du "Editorial Board of ISRN Mechanical Engineering" http://www.hindawi.com/isrn/me/editors.html.
► Chair pour une vingtaine des sessions dans des congrès nationaux et internationaux
► Conférences Plénières et Keynotes:
1) Effect of the Kinematic Hardening on the Heterogeneity of the Local slip under Multiaxial Cyclic Loading Paths with Different Multiscale Models, Plasticity’00, Whistler, Canada, (2000);
2) On the Multiaxial Ratcheting of polycrystals, Plasticity’02, Aruba (2002);
3) Low Cycle Fatigue of Metallic Polycrystals with a New a Micromechanical Modeling Concept, 7th Egyptian Conference on Chemical, Petroleum and Materials Engineering, Oct 28–31, Suez, Egypt (2007)
4) Sur le Concept des Systèmes d’Absorption d’Energie et sa Dernière Innovation, 7èmes Journées de Mécanique JM'EMP07, Alger, (2010)
5) Recent Developments on the Ultrafine Grained Metallic Structures,” Plasticity’11, January 3-8, Puerto Vallarta, Mexique (2011).
► Organisateur des sessions spéciales :
1) “multiscale modeling” : 16th IMACS Word Congress à l’Ecole Polytechnique Fédérale de Lausanne, Suisse, 21-25 août 2000.
2) “Computational plasticity and damage at the microscale”: McMat 2005, The 2005 Joint ASME/ASCE/SES Conference on Mechanics and Materials, Louisianan State University, June 1-3, Louisianan (Baton Rouge).
► Montage des projets de recherche ANR Blanc et International
► Montage des projets de type ANVAR OSEO
► 2004-2007 Membre de la commission des spécialistes (60ème section) de l’université Louis Pasteur – Strasbourg.
► Depuis 2009 Membre du conseil du LISMMA
►► Responsabilités
► 2002-2008 Directeur et Fondateur du Laboratoire de Mécanique, Matériaux et Modélisation (L3M), JE-2483, Université Paris 8 (IUT de Tremblay)
► 1997-2009 Membre élu du Conseil de Département de Génie Industriel et Maintenance
► 1998-2008 Membre élu de la commission des spécialistes, 9ème Groupe, Université Paris 8
► Depuis 1999 Membre élu du Conseil d’Administration de l’IUT de Tremblay-en-France
► Depuis 2009 Présidant du comité consultatif, 9ème Groupe, de l’Université Paris 8


Directeur de thèses en cours :

 ZONTSIKA Noël (Approche multi-échelle de couplage élasto-plastique-endommagement par décolli...)

 RAKOTOARISOA Jean-Claude (Optimisation de temps de calcul et identification des paramètres d'un modèle m...)

 SALIM Ehab (Effet de taille des grains sur le comportement mécanique des matériaux hétérogènes)

 ISHEALL Ahmed (Flambage Plastique Dynamique de Structures Tubulaires Métalliques à Section Ca...)

Directeur de thèses soutenues :

 KERKOURELMIAD Abdelhamid (Modélisation Micromécanique du Comportement Cyclique des Polycristaux sous Cha...)

 RADI Mohammed (Modélisation de l’Effet de la Forme de l’Inclusion sur le Comportement Elas...)

 MOUNOUNGA Blondin (Modélisation de l’Aspect Activation-Désactivation de l’Endommagement des P...)

 CHADLI Morad (Modélisation de l’endommagement mésoscopique des polycristaux via de nouveau...)

 BALEH Rachid (Flambage Plastique Quasi-statique et Dynamique de Structures Tubulaires Métalli...)


Publications :

• Revues internationales

Zontsika, N. A., Abdul-Latif, A., and Ramtani, S.
Pertinence of the Grain Size on the Mechanical Strength of Polycrystalline Metals
J. Eng. Mat. Tech., ASME, vol. 139, 2017
021017-1-10

Abed, F. H., Saffarini, M. H., Abdul-Latif, A., and Voyiadjis, G.
Flow Stress and Damage Behavior of C45 Steel Over a Range of Temperatures and Loading Rates
J. Eng. Mat. Tech., ASME, vol. 139, 2017
021012-1-8

Abdul-Latif A., Ahmed-Ali A., Baleh R., and Ould Ouali M.
Innovative solution for strength enhancement of metallic like-composite tubular structures axially crushed used as energy dissipating devices
Journal of Thin-Walled Structures, vol. 119 , pp. 332-344, 2017
(go to journal)

DARRAS Basil M., ABED Farid H., ABDUL-LATIF Akrum, PERVAIZ Salman
Experimental Investigation of Deformation in 5083 Marine-Grade Aluminum Alloy at Elevated Temperatures
Journal of Materials Engineering and Performance, vol. 24, no. 4, pp. 1663-1668, 2015
(go to journal)

ALIYA D., WALKER L.W., MONTZ E., PASTOR S., ABAD A., HASHIM F.A., ABDUL-LATIF A., AL-ROUBAIY A.O., OH Y.S., GARMESTANI H., ULA N., ES-SAID O.S.
Characterization of the Effects of Active Filler-Metal Alloys in Joining Ceramic-to-Ceramic and Ceramic-to-Metal Materials
Defect and Diffusion Forum, vol. 354, pp. 167-173, 2014
(go to journal)

MENOUER A., BALEH R., DJEBBAR A., ABDUL-LATIF A.
New generation of energy dissipating systems based on biaxial buckling
Thin-Walled Structures, vol. 85, pp. 456-465, 2014
(go to journal)

A. Abdul-Latif
Modeling of grain shape effect on multiaxial plasticity of metallic polycrystals
Journal of Engineering Materials and Technology, vol. 135, pp. 021011 (10 pages)-, 2013
(go to journal)

DARRAS Basil M., ABED Farid H., PERVAIZ Salman, ABDU-LATIF Akrum
Analysis of damage in 5083 aluminum alloy deformed at different strainrates
Materials Science and Engineering: A, vol. 568, pp. 143-149, ed. elsevier, 2013
(go to journal)

RADI M., ABDUL-LATIF A.
A self-consistent approach describing the strain induced anisotropy: Case of yield surface evolution
Computational Materials Science, vol. 54, pp. 356-369, ed. Elsevier, 2012
(go to journal)

G. Dirras, T. Chauveau, A. Abdul-Latif, J. Gubicza, S. Ramtani, Q. Bui, Z. Hegedűs and B. Bacroix
Ultrafine-Grained Aluminum Processed by a Combination of Hot Isostatic Pressing and Dynamic Plastic Deformation: Microstructure and Mechanical Properties
Metallurgical and Materials Transactions A, vol. 43, no. 4, pp. 1312-1322, ed. Springer, 2012
(go to journal)

L. Farbaniec, A. Abdul-Latif, J. Gubicza, and G. Dirras
Ultrafine-grained nickel refined by dislocation activities at intermediate strain rate impact: deformation microstructure and mechanical properties
Journal of Materials Science, vol. 47, pp. 7932-7938, ed. Springer, 2012
(go to journal)

FARBANIEC Lukasz, ABDUL-LATIF Akrum, GUBICZA Jenõ, DIRRAS Guy
High Purity Ultrafine-Grained Nickel Processed by Dynamic Plastic Deformation: Microstructure and Mechanical Properties
Advanced Engineering Materials, vol. 14, no. 11, pp. 1027-1033, ed. Springer, 2012
(go to journal)

ABDUL-LATIF Akrum
Comparative Study of Several Energy Dissipating Devices
Journal of Materials Engineering and Performance, vol. 20, no. 8, pp. 1392-1400, 2011
(go to journal)

MOUNOUNGA T.B., ABDUL-LATIF A., RAZAFINDRAMARY D.
Damage induced anisotropy of polycrystals under complex cyclic loadings
International Journal of Mechanical Sciences, vol. 53, no. 4, pp. 271-280, 2011
(go to journal)

RAZAFINDRAMARY D., ABDUL-LATIF A.
On the efficiency of algorithms for computing a micromechanical constitutive equations coupled with damage
Computational Materials Science, vol. 50, no. 7, pp. 2001-2008, 2011
(go to journal)

DIRRAS Guy, CHAUVEAU Thierry, ABDUL-LATIF Akrum, RAMTANI Salah, BUI Quang-Hien
Microstructure characterization of high-purity aluminum processed by dynamic severe plastic deformation
Physica Status Solidi (a), vol. 207, no. 10, pp. 2233-2237, ed. WILEY-VCH, 2010
(go to journal)

ABDUL-LATIF A., CHADLI M.
Determinist-Probabilistic Concept in Modeling Fatigue Damage Through a Micromechanical Approach
Journal of Engineering Materials and Technology, vol. 132, no. 1, pp. 011002-, 2010
(go to journal)

ABDUL-LATIF A., RADI M.
Modeling of the Grain Shape Effect on the Elastic-Inelastic Behavior of Polycrystals With Self-Consistent Scheme
Journal of Engineering Materials and Technology, vol. 132, no. 1, pp. 011008-, 2010
(go to journal)

ABDUL-LATIF A., DIRRAS G.F., RAMTANI S., HOCINI A.
A new concept for producing ultrafine-grained metallic structures via an intermediate strain rate: Experiments and modeling
International Journal of Mechanical Sciences, vol. 51, no. 11-12, pp. 797-806, 2009
(go to journal)

ABDUL-LATIF A., MOUNOUNGA T. B.
Damage-Induced Anisotropy with Damage Deactivation
International Journal of Damage Mechanics, vol. 18, no. 2, pp. 177-198, 2009
(go to journal)

RADI M., ABDUL-LATIF A.
Grain shape effect on the biaxial elastic–inelastic behavior of polycrystals with a self-consistent approach
Procedia Engineering, vol. 1, no. 1, pp. 13-16, 2009
(go to journal)

ABDUL-LATIF A., BALEH R.
Dynamic Biaxial Plastic Buckling of Circular Shells
Journal of Applied Mechanics, vol. 75, no. 3, pp. 031013-, 2008
(go to journal)

DRUSINA N., MAHAPATRA R., ABDUL-LATIF A., BALEH R., WILHELM C., STOYANOV P., ES-SAID O.S.
Microstructure Analysis of Aluminum Alloy and Copper Alloy Circular Shells After Multiaxial Plastic Buckling
Journal of Materials Engineering and Performance, vol. 17, no. 5, pp. 755-766, 2008
(go to journal)

BUI Quang Hien, DIRRAS Guy F., HOCINI A., RAMTANI Salah, ABDUL-LATIF Akrum, GUBICZA Jenő, CHAUVEAU T., FOGARASSY Z.
Microstructure and Mechanical Properties of Commercial Purity HIPed and Crushed Aluminum
Materials Science Forum, vol. 584-586, pp. 579-584, 2008
(go to journal)

Dieng L., Abdul-Latif A., Haboussi M., Cunat C.
Description de l’Adoucissement Cyclique Relatif au Changement de Chargement avec l’Approche DNLR
Computers, Materials and Continua, vol. 6, pp. 21-33, 2007

Abdul-Latif A., Chadli M.
Modeling of the Heterogeneous Damage Evolution at the Granular Scale in Polycrystals under Complex Cyclic Loadings
International Journal of Damage Mechanics, vol. 16, pp. 133-158, 2007

Baleh R., Abdul-Latif A.
Uniaxial-biaxial transition in quasi-static plastic buckling used as an energy absorber
ASME, Journal of Applied Mechanics, vol. 74, pp. 628-635, 2007

Abdul-Latif A., Baleh R., Aboura Z.
Some improvements on the energy absorbed in axial plastic collapse of hollow cylinders
International Journal of Solids and Structures, vol. 43, pp. 1543-1560, 2006

Dieng L., Abdul-Latif A., Haboussi M., Cunat C.
Cyclic plasticity modeling with the distribution of non-linear relaxations (DNLR) approach
International Journal of Plasticity, vol. 21, pp. 353-379, 2005

Chadli M., Abdul-Latif A.
Meso-Damage Evolution in Polycrystals
ASME, Engineering Materials and Technology, vol. 127, pp. 214-221, 2005

Abdul-Latif A.
A Comparison of Two Self-Consistent Models to Predict the Cyclic Behavior of Polycrystals
ASME, Engineering Materials and Technology, vol. 126, pp. 62-69, 2004

Abdul-Latif A.
Pertinence of the Grains Aggregate Type on the Self-consistent model response
International journal of Solids and Structures, vol. 41, pp. 305-322, 2004

Abdul-Latif A., Nesnas K.
Plastic Collapse of Cylinders under Constrained Sides and Length Conditions
ASME, Engineering Materials and Technology, vol. 125, pp. 215-221, 2003

Abdul-Latif A., Dingli J.Ph., Saanouni K.
Elasto-Inelastic Self-Consistent Model for Polycrystals
ASME, Journal of Applied Mechanics, vol. 69, pp. 309-316, 2002

Nesnas K., Abdul-Latif A.
Lateral Plastic Collapse of Cylinders: Experiments and Modeling
Computer Modeling in Engineering and Sciences, vol. 2, pp. 373-388, 2001

Abdul-Latif A.
On the Lateral Collapse of an Identical Pair of Cylinders
International journal of solid and structures, vol. 37, pp. 1955-1973, 2000

Dingli J.P., Abdul-Latif A., Saanouni K.
Predictions of the Complex Cyclic Behavior of Polycrystals Using a New Self-consistent Modeling
International journal of Plasticity, vol. 16, pp. 411-437, 2000

Abdul-Latif A., Ferney V., Saanouni K.
Fatigue Damage of Waspaloy under Complex Loading
ASME, Engineering Materials and Technology, vol. 121, pp. 278-285, 1999

Abdul-Latif A.
Unilateral Effect in Plastic Fatigue with Micromechanical Approach
International journal of Damage Mechanics, vol. 8, pp. 316-338, 1999

Abdul-Latif A., Dingli J.Ph., Saanouni K.
Modeling of Complex Cyclic Inelasticity in Heterogeneous Polycrystalline Microstructure
Mechanics of Materials, vol. 30, pp. 287-305, 1998

Abdul-Latif A., Saanouni K.
Effect of Some Parameters on the Plastic Fatigue Behavior with Micromechanical Approach
International journal of Damage Mechanics, vol. 6, pp. 433-452, 1997

Abdul-Latif A.
Constitutive Equations for Cyclic Plasticity of Waspaloy
International journal of Plasticity, vol. 12, no. 8, pp. 967-985, 1996

Saanouni K., Abdul-Latif A.
Micromechanical Modeling of Low Cyclic Fatigue under Complex Loadings-Part I. Applications
International journal of Plasticity, vol. 12, pp. 1111-1121, 1996

Abdul-Latif A., Saanouni K.
Micromechanical Modeling of Low Cyclic Fatigue under Complex Loadings-Part II. Applications
International journal of Plasticity, vol. 12, no. 9, pp. 1123-1149, 1996

Abdul-Latif A., Saanouni K.
Damaged Anelastic Behavior of FCC Polycrystalline Metals with Micromechanical Approach
International journal of Damage Mechanics, vol. 3, pp. 237-259, 1994

Abdul-Latif A., Clavel M., Ferney V., Saanouni K.
On the Modeling of Non-proportional Cyclic Plasticity of Waspaloy
ASME, Engineering Materials and Technology, vol. 116, pp. 35-44, 1994

• Livres et chapitres de livres

ABDUL-LATIF Akrum
Ductile Damage Behavior in Low-Cycle Fatigue for Polycrystalline Metallic Materials
Handbook of Macro to Nano Damage Mechanics, Edited by George Z. Voyiadjis, Springer, pp. 341-368, 2015

ABDUL-LATIF Akrum
Numerical Applications in Damage-Induced Anisotropy Damage induced anisotropy in Low-Cycle Fatigue Low-cycle fatigue (LCF) Modeling for Metals
Handbook of Macro to Nano Damage Mechanics, Edited by George Z. Voyiadjis, Springer, pp. 1-22, 2014
(go to journal)

Abdul-Latif A., Dingli J. Ph., Saanouni K.
Multiscale Modeling for Describing the Multiaxial Low-Cycle Fatigue for Polycrystals
IUTAM Symposium on Multiscale Modeling and Characterization of Elastic-Inelastic Behavior of Engineering Materials, pp. 141-, 2002
Eds. by S. Ahzi, M. Cherkaoui, M.A. Khaleel, H.M. Zbib, M.A. Zikry et B. LaMatina, Kluwer (The Netherlands).

• Communications dans des colloques internationaux

Abdul-Latif, A., and Ramtani, S.
Modeling the Grain Size Effect Using Dislocation Kinematics Approach for Metals
Plasticity, Damage & Fracture 2018, Jan. 3-9, Puerto Rico, 2018

Abdul-Latif A., Zontsika, N. A., and Ramtani, S.
Multiscale Model of the Grain Size Impact on Metals Behavior
7th Annual World Congress of Nano Science & Technology-2017 (Nano S&T-2017), October 24-26, 2017, Fukuoka, Japan, 2017

Abdul-Latif A., Ramtani, S., and Zontsika, N. A.
Challenges on modeling of grain size impact on polycrystalline metallic behavior
Nanotech ME 2017, 4 -6 December 2017, Dubai, 2017

ABDUL-LATIF Akrum
Pertinence of the grain size on polycrystalline metals behavior
Multi-physical solutions for harsh environments: Computations and Experiments (March 21-22, 2016 Seoul, Korea), 2016

Abdul-Latif A., Ahmed-Ali A., Baleh R., Razafindramary D.
New concept of passive energy dissipating energy based on plastic buckling
ICTAM 2016, 21-26 August 2016, Montreal, Canada, 2016

A. Ahmed-Ali, R. Baleh, D. Razafindramary and A. Abdul-Latif
EFFECT OF TREATED ZONE GEOMETRY ON THE DYNAMIC PLASTIC BUCKLING OF STEEL COMPOSITE THIN TUBULAR STRUCTURES
International Conference on Dynamics of Composite Structures- DYNCOMP‟2015 (June 2-4, 2015, Arles, France), 2015

Lounis D., Baleh R., Menouer A., Abdul-Latif A., 2014,
New generation of energy dissipating systems based on biaxial buckling for improving vehicular crashworthiness
The Second International Conference on Railway Technology, 8-11 April 2014, Ajaccio, France, 2014

Rakotoarisoa, J.C., Razafindramary, D. and Abdul-Latif, A.,
New strategy for identification parameters of a micromechanical model coupled with ductile damage
ICF13, June 16–21, 2013 (Beijing), 2013

Jean Claude Rakotoarisoa, Donné Razafindramary, Akrum Abdul-Latif
New strategy for identification parameters of a micromechanical model coupled with ductile damage
13th International Conference on Fracture, June 16–21, 2013, Beijing, China, 2013

Aliya D., Walker L. W., Montz E., Pastor S., Abad A., Hashim F.A., Abdul-Latif A., Al-Rubaii A., Oh Y.S., Garmestani H., Ula N., and Es-Said O. S.,
Characterization of the effects of active filler-metal alloys in joining ceramic-to-ceramic and ceramic-to-metal materials
DSL2013 - 9th International Conference on Diffusion in Solids and Liquids, 24th to 28th June 2013, Madrid, (Spain), 2013

D. Razafindramary, A. Abdul-Latif
USE OF GLOBAL MINIMUM OPTIMIZATION IN IDENTIFYING DAMAGE MICROMECHANICAL MODEL PARAMETERS WITH A DAMAGE DEACTIVATION PHENOMENON
International Conference of Damage Mechanics: ICDM 2012, 2012

Abdul-Latif Akrum
Modeling of Grain Shape Effect on Multiaxial Plasticity of Polycrystals
Symposium on Modeling Material Behavior at Multiple Scales, April 8-10, Hanyang University, (Seoul), Korea, 2012

A. Abdul–Latif and R. Baleh
STRAIN RATE AND LOADING COMPLEXITY EFFECTS ON THE CRUSHED STAINLESS STEEL TUBES BEHAVIOR
The 23rd International Congress of Theoretical and Applied Mechanics (ICTAM 2012) , August 19 -24, 2012 (Pékin), 2012
(open access)

Abdul-Latif Akrum
Modeling of Grain Size Impact on the Mechanical Behavior of Polycrystals
6th EUROPEAN CONGRESS ON COMPUTATIONAL METHODS IN APPLIED SCIENCES AND ENGINEERING (ECCOMAS 2012), University of Vienna, Austria, September 10-14, 2012, 2012

A. Abdul-Latif, G. F. Dirras, S. Ramtani, and D. Tingaud
Recent developments on the ultrafine grained metallic structures
PLASTICITY 2011, Puerto Vallarta (Mexico), Jan. 3-8, 2011

A. Ishell, A. Abdul–Latif, R. Baleh and M. Haboussi
Dynamic biaxial plastic buckling of stainless steel thin tubes
COMPDYN 2011 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 25-28 May 2011, Corfu (Greece), 2011

ABDUL-LATIF, A. and M. Radi, M.
Predicted yield surfaces via a self-consistent approach with grain form effect
COMPLAS 2011- International Conference on Computational Plasticity Fundamentals and Applications, 7-9 September 2011,Barcelona, (Spain), 2011

Farbaniec, L., Abdul-Latif, A., Dirras, G.
Grain Refinement by Dynamic Plastic Deformation: Microstructure and Mechanical Properties
EUROMAT 2011, 12-15 September, Montpellier, (France), 2011

Bacroix, B., Chauveau, T., Dirras, G., Castelnau, O., Brenner, R., Abdul-Latif, A., Le Bourlot C., Wauthier, A.,
X-Ray Diffraction Evaluation of the Hardening State of Various Cubic and Hexagonal Materials after Large Strains
Neutron and X-Ray Studies of Advanced Materials IV, TMS annual Meeting, Feb-27 – March 3, San Diego, USA, 2011

A. ABDUL-LATIF
Metallic Polycrystals Behavior and their Dependency on Grain Size
3rd International Conference on Nanotechnology (ICN11), United Arab Emirates University, 28-30 November, 2011

A. ABDUL-LATIF
New modeling of ultrafine and nanocrystalline grained materials behavior
48th Annual Technical Conference of Society of Engineering Sciences (SES-2011), October 12-14, Northwestern University, Evanston, Illinois 60208, 2011

A. ABDUL-LATIF
Elastic–viscoplastic behavior of nanocrystalline materials modeling
Multiphysics 2011, 15-16 December, Barcelona, Spain, 2011

A. Abdul-Latif, B. Mounounga T., and D. Razafindramary
Anisotropic Damaged Behavior of Polycrystals
12th International Conference on Non-conventional Materials and Technologies Materials & Technologies for Sustainable Infrastructure System (IC-NOCMAT 2010), Le Caire (Egypte), 2010

Abdul-Latif, A.,
Dependence of the Polycrystals Behavior on Grain Size
12th Mesomechanics, 21-25 June 2010, National Taiwan University of Science and Technology (NTUST), Taipei, Taiwan, 2010

Abdul-Latif, A., kerkourelmiad, A., et Razafindramary, D.
Elasto-Inelastic Cyclic Modeling for Ellipsoidal Inclusion under Multiaxial Loading Paths
IV ECCM, May 16-21, Palais des Congrès, Paris (France), 2010

ABDUL-LATIF A., B. MOUNOUNGA T. and D. RAZAFINDRAMARY
On the deactivated damage effect on the mechanical behavior of polycristalline metallic materials
The First International Conference on “Advances in Interaction and Multiscale Mechanics (AIMM’10)” will be held in Jeju Island, Korea May 30-June 3, 2010, 2010

Haboussi M., Abdul-Latif A., Dieng L., Cunat C.
On the inelasticity modeling based on dissipation spectral analysis
12th Mesomechanics, 21-25 June 2010, National Taiwan University of Science and Technology (NTUST), Taipei, Taiwan, 2010

Abdul-Latif, A.
Grain Size Effect on the Mechanical Behavior Heterogeneous Polycrystals
11th International Conference on Mining, Petroleum and Metallurgical Engineering, 16-19 March, Sharm El-Sheikh, (Egypt), 2009

Abdul-Latif, A., and Radi, M.
Grain Form Effect on the Biaxial Elasto-inelastic Behavior of Polycrystals with a Self-Consistent Approach
10th Mesomechanics, 24-26 June 2009, Oxford University, (UK), 2009

Abdul-Latif, A. and Baleh, R.
A new concept of dynamic biaxial plastic crushing of metallic thin-walled tubes
22th International Congress of Theoretical and Applied Mechanics (ICTAM2008), August 24–30 (Adelaide, Australia), 2008

Abdul-Latif, A., and Chadli, M.
Determinist-Probabilistic Micromechanical Model of Damage
9th Mesomechanics, Jan 28 – Feb. 1, May 13-17, HBRC, Giza, Egypt., 2008

Mounounga T., B. S., Razafindramary, D., and, Abdul-Latif, A.
Modeling of Damage Deactivation under Complex Cyclic Loadings
5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), June 30–July 5, 2008, (Venice), 2008

Abdul-Latif, A.
Modeling the effect of the grain size on the mechanical behavior of ultrafine grained metallic structures
ICN08, Nov. 16-20, Abu Dhabi, UAE, 2008

Radi, M., and Abdul-Latif, A.
New Elasto-Inelastic Self-Consistent Model for Ellipsoidal Inclusion
8th Mesomechanics, May 13-17, Presqu'île de Giens (France), 2007

Haboussi, M., Dieng, L., Abdul-Latif, A., et Cunat C.
About a constitutive modelling based on the spectral analysis of the dissipation: Application to cyclic plasticity
7th World Congress on Computational Mechanics (WCCM2006), July 16-22, Los Angeles, California (USA), 2006

Baleh, R., Abdul-Latif, A., et Aboura, Z.
Energy absorption improvement via sub-divided tubes under Uniaxial Dynamic loading
Second International Conference on Engineering Failure Analysis (ICEFA II), 13 – 15 September 200, Toronto, (Canada), 2006

Abdul-Latif, A.
Damaged Behavior of Polycrystals Coupled with Damage
7th Mesomechanics 2005, August 1-4, 2005, Quebec (Canada), 2005

Abdul-Latif, A.
Modeling of the Elastic and Plastic Heterogeneity at the Méscoscale
McMat 2005, Louisianan State University, June 1-3, Louisianan (Baton Rouge), 2005

Chadli, M. and Abdul-Latif, A.
Heterogeneous nature of the Meso-damage in Polycrystals in Plastic Fatigue
6th Mesomechanics 2004, May 31 – June 4, University of Patras, (Greece), 2004

Abdul-Latif, A. and Chadli, M.
Modeling of the Damage Evolution at the Granular Scale in Polycrystals under Complex Cyclic Loadings
21th International Congress of Theoretical and Applied Mechanics, August 15-21 (Poland°, 2004

Abdul-Latif, A.
Using the Superplastic as a Representative Material to Simulate the Behavior of Rate Sensitive Engineering Materials at High Strain Rates
EURO-SPF 2004, July 7th-9th, Ecole des Mines d'Albi-Carmaux, 2004

Abdul-Latif, A. and Baleh, R.
Multiaxial Cyclic Behavior of Polycrystals with Multiscale Model
Plasticity 2003, January 3-9, (Quebec), 2003

Baleh, R., Abdul-Latif, A., and Aboura, Z.
Plastic flow and its influence on the absorbed energy during the axial collapse of tubes
Plasticity 2003, January 3-9, (Quebec), 2003

Chadli, M., and Abdul-Latif, A.
Heterogeneous Nature of the Meso-Damage in Polycrystals in Plastic Fatigue
International Conference of Heterogeneous Materials Mechanics (ICHMM) June 24-29 (Chine), 2003

Abdul-Latif, A., Saanouni, K., and Dingli, J. Ph.
Multiscale Modeling for Describing the Multiaxial Low-Cycle Fatigue for Polycrystals
IUTAM, Symposium on Multiscale Modeling and Characterization of Elastic-Inelastic Behavior of Engineering Materials, 20-25 Oct. Marrakech, Morocco, 2002

Abdul-Latif, A.
Multiscale Modeling: Aggregate of Grains and Its Influence on the Inelastic Behavior in Polycrystalline Microstructure
4th International Conference on New Challenges in Mesomechanics, Aalborg University, Denmark, August 26-30, 2002

Abdul-Latif, A.
On the Multiaxial Ratcheting of polycrystals
Plasticity 2002, January 3-9, (Aruba), 2002

Abdul-Latif, A.
Plastic Fatigue Prediction with Multiscale Modeling
Plasticity’2002, January 3-9, 2002, (Aruba), 2002

Abdul-Latif, A.
Plastic Fatigue Prediction with Multiscale Modeling
MMC Conference, June 27-29 Dan Diego (USA), 2001

Dingli, J. P., Abdul-Latif, A., and Saanouni, K.
Damage In multiaxial Low-cycle Fatigue of Polycrystals
EUROMECH, June 26-29, Metz, France, 2000

Abdul-Latif, A.
Damage In Uniaxial Low-cycle Fatigue of Polycrystals
3rd Int. Conference of Mechanics & Materials in Design, may, 29-31, Orlando, Florida, 2000

Abdul-Latif, A.
Effect of the Kinematic Hardening on the Heterogeneity of the Local slip under Multiaxial Cyclic Loading Paths with Different Multiscale Models
Plasticity’2000, July 17-21, Whistler Resort, (Canada), 2000

Dingli, J. P., Abdul-Latif, A., and Saanouni, K.
Multiscale Model for biaxial Low-cycle Fatigue of Polycrystals
16th IMACS Word congress à Lausanne, (Suisse), 2000

Abdul-Latif, A.
Heterogeneity of the Local Inelastic Deformation Prior to Fatigue Damage Initiation
Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation, pp.869, Ed. by Akhter S. Khan, Neat Press (Maryland), 1999

Dingli, J. P., Abdul-Latif, A., and Saanouni, K.
Micromechanical Modeling of the Inelastic Behavior of Polycrystals
Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation, pp.889, Ed. by Akhter S. Khan, Neat Press (Maryland), 1999

Abdul-Latif, A. and Nesnas, K.
On the Large Deformation of Cylinders with Constrained Sides Condition
Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation, pp.685, Ed. by Akhter S. Khan, Neat Press (Maryland), 1999

Dingli, J. P., Abdul-Latif, A., and Saanouni, K.
On the Multiscale Modeling of the Damaged Behavior of Polycrystals
5th US Nac. Congress on Computational Mechanics, August 4-6, University of Colorado at Boulder, (USA), 1999

Dingli, J. P., Abdul-Latif, A., and Saanouni, K.
Micromechanical Modeling of the Non-proportional Cyclic Elasto-Inelastic Behavior of FCC Polycrystals
Symposium on Multi-scale Modeling of Mechanical Properties of Materials, 13-15 June, Autrans, France, 1998

Dingli, J. P., Abdul-Latif, A., and Saanouni, K.
Study of the Local and Global Responses of Heterogeneous Polycrystals under Non-proportional Cyclic Loading with Micromechanical Approach
SES’98, 27-30 September, Pullman, Washington, (USA), 1998

Nesnas, K. and Abdul-Latif, A.
Modeling of Large Deformation of Cylinders under Transverse Loading
Physics and Mechanics of Finite Plastic & Viscoplastic Deformation, pp. 435, ed. by Akhtar S. Khan, Neat Press (Maryland), 1997

Abdul-Latif, A. and Saanouni, K.
Effect of Some Parameters on the Plastic Fatigue Behavior with Micromechanical Approach
19th International Congress of Theoretical and Applied Mechanics, August 25-31 (Kyoto), 1996

Abdul-Latif, A.
Uniaxial Cyclic Plasticity of Waspaloy
Seminar on the Mechanical Behavior of Superalloys 4-5 Oct. (Berlin), 1995

Abdul-Latif, A.
The Use of a Pair of Laterally Compressed Hollow Cylinders as an Energy Absorbing Device Circular
MIT, Inter. Symposium on Structural Failure, 6-8 June (USA)., 1988

• Communications dans des colloques francophones

Abdul-Latif A.
Modélisation micromécanique de l’anisotropie induite par le concept d'activation/désactivation de l’endommagement
Congrès Algérien de Mécanique 26-30 novembre, Constantine- Algérie, 2017

Baleh R., Menouer A., Razafindramary, D., and Abdul-Latif A.
Ecoulement énergétique sous flambage dynamique multiaxial
Congrès Algérien de Mécanique 26-30 novembre, Constantine- Algérie, 2017

ABDUL-LATIF Akrum
Mechanical behavior of heterogeneous polycrystals and their size dependency
Plasticité 2016- Poitiers (11-13 Avril 2016), 2016

Zontsika N., Ramtani S., Abdul-Latif A.
Modélisation de l’effet de taille des grains en grandes déformations avec une approche micromécanique
Plasticity Symposium 2013, 17-19 April 2013, Paris, 2013

Abdul-Latif, A., et Baleh, R.,
Sur le concept des systèmes d’absorption d’énergie et sa dernière innovation (Conférence Plénière)
Les 7èmes Journées de Mécanique JM'EMP07, 12-13 Avril, (Alger), 2010

Dirras G., Hocini A., Bui Q. H. Ramtani S., Abdul-Latif A.
Comportement Mécanique de Nano Poudres Métalliques Consolidées et Impactées à Vitesse Intermédiaire
18ème Congres Français de Mécanique, 27-31 août 2007, Grenoble, 2007

Baleh, R., Aboura, Z., Abdul-Latif, A. et Razafindramary, D.
Ecoulement Plastique et Dissipation d'Energie sous Chargement Dynamique
CNRIUT 2007, 31 mai-1er juin (Thionville-Yutz), 2007

Razafindramary, D., Abdul-Latif, A., et kerkourelmiad, A.
Intégration d’un Modèle Micromécanique : Applications sous Chargements Cycliques Complexes
18ème Congres Français de Mécanique, 27-31 août 2007, Grenoble, 2007

Radi M., Abdul-Latif A.
Modèle auto-cohérent pour une inclusion ellipsoïdale
18ème Congres Français de Mécanique, 27-31 août 2007, Grenoble, 2007

Mounounga T. B. S., Abdul-Latif, A., et Razafindramary, D.
Activation de l’endommagement en fatigue plastique multiaxiale pour les polycristaux
17ème Congres Français de Mécanique, 29 août-2 Sept., Troyes, 2005

Baleh, R., Abdul-Latif, A., et Aboura, Z.
Comportement dynamique de tube écrasé axialement
17ème Congres Français de Mécanique, 29 août-2 Sept., Troyes, 2005

Chadli, M. et Abdul-Latif, A.
Etude paramétrique d’un modèle micromécanique probabiliste
17ème Congres Français de Mécanique, 29 août-2 Sept., Troyes, 2005

Abdul-Latif, A.
Modélisations de l'endommagement mésoscopique des polycristaux sous sollicitations cycliques biaxiales
MECAMAT: Physique et Mécanique de l'Endommagement et de la Rupture, juin 2005, Ecole Nationale Supérieure de Mécanique et d'Aérotechnique (Poitiers)., 2005

Baleh, R., Abdul-Latif, A. et Aboura, Z.
Etude Expérimentale sur un Système d’Absorption d’Energie par Ecrasement Axial
16ème Congres Français de Mécanique, 1-5 Sept., Nice, 2003

Baleh, R., Abdul-Latif, A., et Aboura, Z.
Grande déformation de structures tubulaires : systèmes d’absorption d’énergie
CNRIUT 2003, 15-16 mai 2003, (Tarbes), 2003

Mounounga T. B. S., Chadli, M. et Abdul-Latif, A.
Hétérogénéités Locales de l’Endommagement en Fatigue Plastique des Polycristaux
16ème Congres Français de Mécanique, 1-5 Sept., Nice, 2003

Baleh, R., et Abdul-Latif, A.
Sur l’effet de rochet multiaxial
CNRIUT 2003, 15-16 mai 2003, (Tarbes), 2003

Abdul-Latif, A.
Comparative Study of Several Energy Dissipating Devices
CSM3 3ème Congrès sur les matériaux, 16-18 Mai, Beyrouth (Liban), 2002

Abdul-Latif, A., et Aboura, Z.
Proposition d’une loi constitutive pour la modélisation du comportement mécanique du polypropylène à différentes vitesses de déformations
CSM3 3ème Congrès sur les matériaux, 16-18 Mai 2002, Beyrouth (Liban), 2002

Dingli, J. P., Abdul-Latif, A., et Saanouni, K.
Modélisation Micromécanique du Comportement Elasto-inélastique des Polycristaux sous Chargements Cycliques Complexes
14ème Congres Français de Mécanique, 30 Août-3 Sept., Toulouse, 1999

Abdul-Latif, A. and Saanouni, K.
Modélisation de l’Endommagement de Fatigue Plastique dans les Matériaux Hétérogènes
Réunion de la MECAMAT «endommagement», 25-26 Juin, Marne la Vallée, 1997

Saanouni, K., et Abdul-Latif, A.
Modélisation Micromécanique de l’Endommagement de Fatigue Plastique
12ème Congres Français de Mécanique, 8-4 Sept., Strasbourg, 1995

Abdul-Latif, A. and Saanouni, K.
Description de l’Hétérogénéité Locale de l’Endommagement par une Approche Micro-Macro des Polycristaux CFC
7ème Colloque Annuel MECAMAT, 14-17 mars, Poitiers, 1994

Abdul-Latif, A. and Saanouni, K.
Modélisation Micromécanique de l’Endommagement en Elasto-viscoplasticité Cyclique
Réunion annuelle de groupe «endommagement» de MECAMAT, 7-9 décembre, Brest, 1994