RIVIERE Alain


Détails :

Statut : Professeur des universités

Habilité à diriger des recherches : oui

Section CNU : 60

Equipe : Ingénierie numérique
Tél : 0149452921
Fax : 0149452991
Courriel : alain.riviere@supmeca.fr
Adresse : 3, rue Fernand Hainaut - 93407 Saint Ouen


Directeur de thèses en cours :

 BOUGAA Mohammed (Réalité virtuelle collaborative et Ingénierie systemes dans l'usine du futur)

 ABID Abdelmonaam (APPROCHE MECATRONIQUE POUR LA CONCEPTION DES SYSTEMES INTEGRES DE PRODUCTION)

 BERRICHE Fatima (Capitalisation et intégration des connaissances de conception des systemes comp...)

 HADRICH Ayman (Synthèse de tolérancement fonctionnel 3D (GPS) basée sur une démarche d'ing...)

 ALI Anissa (Représentation algébrique et analyse d'un système de solides)

 BARBEDIENNE Romain (Extension des SATT à la multi-physique pour le positionnement relatif dynamique...)

Directeur de thèses soutenues :

 HAMZA Ghazoi (Contribution au développement des modèles analytiques compacts pour l'analyse ...)

 DA SILVA Frédéric (Méthodologies de réduction de modèles multiphysiques pour la conception et la...)

 HASSINE Hichem (Modélisation, Simulation et Optimisation pour l'Ecofabrication)

 MHENNI Faïda (VERS UNE APPROCHE INTÉGRÉ D’ANALYSE DE SÛRETÉ DE FONCTIONNEMENT DES SYSTEM...)

 RENAUD Ruixian (Modélisation 3D géométrique et physique pour la préconception de systèmes m...)

 MILADI CHAABANE Mariem (Modélisation géométrique et mécanique pour les systèmes mécatroniques)

 AYADI Mohamed (Prototypage d'un système d'information pour la conception et la simulation coll...)

 HAMMADI Moncef (Contribution à l’intégration de la modélisation et la simulation multi-phys...)

 MANDIL Guillaume (Modèle de représentation géométrique intégrant les états physiques du produit)

 PLATEAUX Régis (Vers un continuum de conception mécatronique basé sur une approche topologique)

 YENGUI Hédi (Modélisation du comportement dynamique non linéaire d'un système machine-outi...)

 MEZGHANI Aida (Optimisation du calcul des dispersions angulaires tridimensionnelles)

 CAILLIAU Pierre-Edouard (Modélisation géométrique variationnelle par la déclaration de la modificatio...)

 SOCOLIUC Michel (Modélisation de l’influence des schémas de tolérancement dans les liaisons ...)

 JABALLI Karim (Contribution à la génération assistée par ordinateur du tolérancement de f...)

 MOINET Mireille (Descriptions non cartésiennes et résolution de problèmes géométriques sous ...)

 KESSENTINI Amir (Modélisation du comportement dynamique non-linéaire d’un système complexe m...)

 CHOLEY Jean-Yves (Une approche variationnelle de l’association des références en tolérancemen...)

 TOULORGE Harald (Contribution à un processus numérique d’assistance fonctionnelle à la synth...)

 DUONG An-Ninh (Spécification, analyse et résolution des problèmes géométriques 2D et 3D d...)


Participation à des jurys :

(Modèles et outils de capitalisation des connaissances en conception - Contribution a...)


Publications :

• Revues internationales

Hamza G., Choley J.-Y., Hammadi M., Barkallah M., Louati J., Riviere A., Haddar M.
Pre-designing of a mechatronic system using an analytical approach with Dymola
Journal of Theoretical and Applied Mechanics, vol. 53, no. 3, 2015
issn: 1429-2955
(go to journal)

AYADI M., COSTA AFFONSO R., CHEUTET V., MASMOUDI F., RIVIERE A., HADDAR M.
Conceptual Model for Management of Digital Factory Simulation Information
International Journal of Simulation Modelling, vol. 12, no. 2, pp. 107-119, 2013
(go to journal)

M. Miladi Chaabane, R. Plateaux, J.-Y. Choley, C. Karra, A. Riviere, M. Haddar
New topological approach for the modelling of mecatronic systems: application for piezoelectric structures
European Journal of Computational Mechanics, vol. 22, no. 2-4, 2013
(go to journal)

Mariem Miladi Chaabane, Regis Plateaux, Jean-Yves Choley, Chafik Karra, Alain Riviere, Mohamed Haddar
New approach to solve dynamic truss structure using topological collections and transformations
The International Journal of Mechanic Systems Engineering, vol. 3, no. 4, pp. 162-169, 2013
ISSN: 2226-6461
(open access)

HAMMADI M., CHOLEY J. Y., PENAS O., LOUATI J., RIVIERE A., HADDAR M.
Layout optimization of power modules using a sequentially coupled approach
International Journal of Simulation Modelling, vol. 10, no. 3, pp. 122-132, ed. DAAAM International, 2011
(go to journal)

MHENNI Faïda, SERRÉ Philippe, MLIKA Abdelfattah, ROMDHANE Lotfi, RIVIERE Alain
Variations and Clearance Computation in Overconstrained Mechanisms
Asian International Journal of Science and Technology in Production and Manufacturing Engineering (AIJSTPME), vol. 4, no. 3, pp. 59-69, 2011
(open access)

MEZGHANI A., BELLACICCO A., LOUATI J., RIVIERE A., HADDAR M.
Analysis of the Manufactured Tolerances with the Three-Dimensional Method of Angular Chains of Dimensions Applied to a Cylinder Head of Car Engine
Engineering, vol. 2, pp. 771-779, ed. Scientific Research, 2010
(go to journal)

PLATEAUX Régis, PENAS Olivia, CHOLEY Jean-Yves, M’HENNI Faïda, RIVIERE Alain
Integrated design methodology of a mechatronic system
Mécanique & Industries, vol. 11, no. 5, pp. 401-406, 2010
(go to journal)

BOURDET Pierre, RIVIERE S., CLEMENT S.
A new variational association process for the verification of geometrical specifications
Journal of Computing and Information Science in Engineering, vol. 7, no. 1, 2007
ISSN 1530-9827

KESSENTINI A., CHEVALLIER G., LOUATI J., RIVIERE A., HADDAR M.
F.E.M. of the drilling machine-tool including the giroscopic effect
Advances in Production Engineering and Management, vol. 2, pp. 63-78, 2007

SERRÉ Philippe, ORTUZAR Auxkin, RIVIERE Alain
Non-Cartesian Modelling for Analysis of the Consistency of a Geometric Specification for Conceptual Design
International Journal of Computational Geometry & Applications (IJCGA), vol. 16, no. 5/6, pp. 549-565, ed. World Scientific, 2006

TOULORGE H., BUYSSE D., BELLACICCO A., RIVIERE A.
Functional assistance for computer-aided tolerancing software
KLUWER ACADEMIC PUBLISHERS, pp. 265-265, ed. KLUWER ACADEMIC PUBLISHERS, 2003
1-4020-1423-6

SELLAKH R., RIVIERE A., CHEVASSUS N., MARGUET B.
Geometric Product Specification and Verification: Integration of Functionality
KLUWER ACADEMIC PUBLISHERS, pp. 287-299, ed. KLUWER ACADEMIC PUBLISHERS, 2003
1-4020-1423-6

TOULORGE H., RIVIERE A., BELLACICCO A., SELLAKH R.
Towards a digital functional assistance process for tolerancing
Journal of Computing and Information Science in Engineering, vol. 3, ed. ASME, 2003

DESROCHERS A., RIVIERE A.
A Matrix approach to the representation of tolerance zones and clearance
International Journal of Advanced Manufacturing Technology SPRINGER VERLAG, vol. 13, pp. 630-636, 1997

RIVIERE A., CLEMENT A., VALADE C.
The TTRS : 13 oriented constraints for dimensioning, tolerancing and inspection
Series on Advanced in Mathematics for Applied Sciences, vol. 45, pp. 24-42, ed. WORLD SCIENTIFIC, 1997

• Revues nationales

MHENNI F., MLIKA A., ROMDHANE L., SERRE P., RIVIERE A.
Dependency between Dimensional Deviations in Overconstrained Mechanisms
Revue d'Ingénierie Numérique Collaborative, vol. 1, no. 1/2, pp. 115-125, ed. Harigué, 2009

SELLAKH R., SELLEM E., RIVIERE A.
Spécification et simulation des imperfections géométriques en CFAO
Revue de l’Association Française de mécanique, « Mécanique et Industries », vol. 1, no. 4, pp. 365-373, 2000

CUBELES-VALADE C., RIVIERE A., SERRE P., CLEMENT A.
Intégration de la géométrie nominale et réelle
Revue internationale de CFAO et d'informatique graphique, vol. 13, no. 1, pp. 9-25, ed. Hermes, 1998

CLEMENT A., RIVIERE A., CUBELES - VALADE C.
L’intégration du tolérancement et de contrôle via le modèle SATT
Revue du GAMI, vol. 50, no. 4, 1997

CLEMENT A., RIVIERE A., SERRE P.
Les SATT : un modèle déclaratif commun pour le paramétrage, le tolérancement et l'assemblage
Revue internationale de CFAO et d'informatique graphique, vol. 11, no. 1-2, pp. 149-164, ed. Hermes, 1996
0298-0924

• Livres et chapitres de livres

Moncef HAMMADI, Jean-Yves CHOLEY, Alain RIVIERE and Mohamed HADDAR
Integrating Radial Basis Functions with Modelica for Mechatronic Design
Proceedings of the Fifth International Conference Design and Modeling of Mechanical Systems, CMSM´2013, Djerba, Tunisia, March 25-27, 2013, vol. Design and Modeling of Mechanical Systems, no. Integrating Radial Basis Functions with Modelica for Mechatronic Design, pp. 19-25, ed. Mohamed Haddar ; Lotfi Romdhane; Jamel Louati and Abdelmajid Ben Amara, 2013
(go to journal)

MANDIL G., SERRE P., DESROCHERS A., CLEMENT A., RIVIERE A.
Coordinates Free Approach for the Calculation of Geometrical Requirement Variations
Global Product Development, pp. 193-200, ed. Springer-Verlag, 2011
(go to journal)

MOINET M., SERRE P., RIVIERE A., CLEMENT A.
A New Approach to Transform a Constrained Geometric Object
Global Product Development, pp. 149-157, ed. Springer-Verlag, 2011
(go to journal)

PENAS O, PLATEAUX R. , CHOLEY J.Y. , KADIMA H. , SORIANO T. , COMBASTEL C, RIVIERE A.
Conception mécatronique. Vers un processus continu de conception mécatronique intégrée
TI Techniques de l'ingénieur, vol. BM 8 020, pp. 1-23, ed. TI Techniques de l'ingénieur, 2011

Mandil Guillaume, Desrochers Alain, Rivière Alain
Geometric Requirement Variations across the Product Lifecycle
Product Life-Cycle Management, ed. Max Giordano, University of Savoy, France. Luc Mathieu, University of Paris-Sud 11, France. François Villeneuve, University of Grenoble, France. , 2010
9781848212763

SERRE P., RIVIERE A., CLEMENT A.
Parametric Specification of Mechanisms
Geometric Tolerancing Product, pp. 183-205, ed. ISTE-WILEY, 2010
ISBN 978-1-84821-118-6

SERRE P., RIVIERE A., CLEMENT A.
Dependence and Independence of Variations of a Geometric Object
Models for Computer Aided Tolerancing in Design and Manufacturing, pp. 23-34, ed. Springer, 2007
ISBN 1-4020-5437-8

SERRE P., RIVIERE A., CLEMENT A.
Spécification paramétrique des mécanismes
Tolérancement géométrique des produits, pp. 195-217, ed. Hermes-Lavoisier, 2007
ISBN 978-2-7462-1509-2

RIVIERE A., CLEMENT A, SERRE P.
Analysis of the Dependency between manufacturing and Design Specification
International Centre for Mechanical Sciences : Courses and Lectures, no. 486, pp. 757-766, ed. Springer, 2005
3-211-26537-6

SERRE P., RIVIERE A., CLEMENT A.
Analysis of Functional Geometrical Specification
Geometric Product Specifications and Verification : Integration of Functionality, pp. 115-125, ed. Kluwer Academic, 2003
1-4020-1423-6

SERRE P., CLEMENT A, RIVIERE A.
Formal Definition of Tolerancing in CAD and Metrology
Integrated Design and Manufacturing in Mechanical Engineering, pp. 211-218, ed. Kluwer Academic, 2002
1-4020-0979-8

CLEMENT A., RIVIERE A., SERRE P.
A Declarative Approach for Geometry and Topology: a New Paradigm for CAD-CAM Systems
Integrated Design and Manufacturing in Mechanical Engineering, pp. 199-206, ed. Kluwer Academic, 1999
0-7923-6024-9

CLEMENT A., RIVIERE A., SERRE P.
Global Consistency of Dimensioning and Tolerancing
Global Consistency of Tolerances, pp. 1-26, ed. Kluwer Academic, 1999
Keynote Paper. ISBN 0-7923-5654-3

CLEMENT A., RIVIERE A., SERRE P., VALADE C.
The TTRS: 13 Constraints for Dimensioning and Tolerancing
Geometric Design Tolerancing : Theories, Standards and Applications, pp. 122-131, ed. Chapman & Hall, 1998
0-412-83000-0

CLEMENT A., RIVIERE A., SERRE P.
A Declarative Information Model for Functional Requirements
Computer-Aided Tolerancing, pp. 3-16, ed. Chapman & Hall, 1996
ISBN 0-412-72740-4

• Communications dans des colloques internationaux

HAMZA Ghazoi, CHOLEY Jean-Yves, HAMMADI Moncef, BARKALLAH Maher, LOUATI Jamel, RIVIERE Alain, HADDAR Mohamed
Pre-dimensioning of the Dynamic Properties of the Wind Turbine System Using Analytical Approach
Proceedings of the Sixth Conference on Design and Modeling of Mechanical Systems, CMSM'2015, pp. 179-188, 2015
(go to journal)

BARBEDIENNE Romain, PENAS Olivia, CHOLEY Jean-Yves, RIVIERE Alain, WARNIEZ Aude, DELLA MONICA Francesco
Introduction of geometrical contraints modeling in SysML for mechatronic design
Mecatronics 2014, pp. 145-150, ed. IEEE, 2014
(go to journal)

HAMZA Ghazoi, BARKALLAH Maher, LOUATI Jamel, HADDAR Mohamed, HAMMADI Moncef, CHOLEY Jean-Yves, RIVIERE Alain
Analytical approach for the integrated preliminary analysis of mechatronic systems subjected to vibration
Mecatronics (MECATRONICS), 2014 10th France-Japan/ 8th Europe-Asia Congress, pp. 151-155, 2014
(go to journal)

Moncef Hammadi, Jean-Yves Choley, Olivia Penas and Alain Riviere
Mechatronic System Optimization based on Surrogate Models - Application to an Electric Vehicle
In Proceedings of the 2nd International Conference on Simulation and Modeling Methodologies,Technologies and Applications, pp. 11-16, ed. SciTePress, 2012
(go to journal)

Moncef Hammadi, Jean-Yves Choley, Olivia Penas and Alain Rivière
Multidisciplinary approach for modelling and optimization of Road Electric Vehicles in conceptual design level
IEEE International Conference on Electrical Systems for Aircraft, Railway and Ship Propulsion, 2012
(go to journal)

M. Hammadi; J.Y. Choley; O. Penas; A. Rivière; J. Louati and M. Haddar;
A new Multi-criteria Indicator for Mechatronic System Performance Evaluation in Preliminary Design Level
9th France-Japan Congress, 7th Europe-Asia Congress, 13th International Workshop on Research and Education in Mechatronics, IEEE MECATRONICS REM, 2012
isbn : 978-1-4673-4770-9
(go to journal)

CHAABANE Mariem Miladi, PLATEAUX Regis, CHOLEY Jean-Yves, KARRA Chafik, RIVIERE Alain, HADDAR Mohamed
Topological Approach to Solve 2D Truss Structure
IEEE 9th France-Japan Congress, 7th Europe-Asia Congress, 13th International Workshop on Research and Education in Mechatronics, IEEE MECATRONICS REM, pp. 437-444, 2012
(go to journal)

MHENNI Fauida, CHOLEY Jean-Yves, RIVIERE Alain, NGUYEN Nga, KADIMA Hubert
SysML and Safety Analysis for Mechatronics Systems
IEEE 9th France-Japan Congress, 7th Europe-Asia Congress, 13th International Workshop on Research and Education in Mechatronics, IEEE MECATRONICS REM, pp. 417-424, 2012
(go to journal)

HAMMADI Moncef, CHOLEY Jean-Yves, LOUATI Jamel, RIVIERE Alain and HADDAR Mohamed
Towards a Multiphysical Integrated Modelling Approach in Automotive Mechatronics Design
CMSM, 2011

Moncef Hammadi; Olivia Penas; Jean-Yves Choley ; Alain Rivière ; Jamel Louati et Mohamed Haddar
Approche intégrée de modélisation multiphysique pour la conception mécatronique
International Conference on Integrated Design and Production, Maroc, 2011

MOINET M., SERRE P., RIVIERE A., CLEMENT A.
A New Approach to Transform a Constrained Geometric Object
CIRP Design International Conference, Nantes (France). April 19-21, 2010

MANDIL G., SERRE P., DESROCHERS A., CLEMENT A., RIVIERE A.
Coordinate Free Approach for the Calculation of Geometrical Requirement Variations
20th CIRP Design Conference, Nantes (France), April 19-21, 2010
(go to journal)

MANDIL G., DESROCHERS A., SERRE P., RIVIERE A.
Assembling coordinate free representations for the calculation of geometric variations
IDMME-Virtual Concept, Bordeaux (France), October 20-22, 2010
(go to journal)

PLATEAUX, PENAS, CHOLEY, RIVIERE
Integrated Design for a Mechatronic System with CATIA V6
Mecatronics Yokohama, 2010

HAMMADI Moncef, CHOLEY Jean-YVES, RIVIERE Alain, LOUATI Jamel, HADDAR Mohamed
A new integrated approach to optimize wire bondings
IMPACT Djerba, 2010

MHENNI Faïda, PLATEAUX Régis, CHOLEY Jean-Yves, PENAS Olivia, RIVIERE Alain
Modelica/Dymola, langage et environnement de simulation universel ?
3ième Congrès International Conception et Modélisation des Systèmes Mécaniques, CMSM’2009, Hammamet, Tunisie, 16-18 mars , 2009

HAMMADI Moncef, CHOLEY Jean-YVES, RIVIERE Alain, LOUATI Jamel, HADDAR Mohamed
Approche intégrée de dimensionnement des composants multi-physiques des systèmes mécatroniques
CPI 2009, 2009

MHENNI F., SERRE P., MLIKA A., ROMDHANE L., RIVIERE A.
Aide à la synthèse de tolérances pour des mécanismes hyperstatiques
9ème Congrès de Mécanique, Marrakech (Maroc), April 21-24, 2009

MHENNI F., SERRE P., MLIKA A., ROMDHANE L., RIVIERE A.
Clearance computation for mobile mechanisms : Application to the Bennett linkage
International Conference on Integrated Design and Production (CPI'2009), Fès (Morocco), October 19-21, 2009

CHOLEY, PENAS, PLATEAUX, KADIMA, RIVIERE
A COMPUTERISED GPS “GO-TO” TELESCOPE MODELLING WITH SYSML
REM 2009 Glasgow, 2009

ROUMIZADEH Behrouz, CHOLEY Jean-Yves, PLATEAUX Regis, PENAS Olivia, RIVIERE Alain
An overview on the ECAD/MCAD data exchange: Focus on STEP AP210
REM 2009, 2009

Guillaume MANDIL, Alain DESROCHERS, Alain RIVIERE
Computational Methodology for the Prediction of Functional Requirement Variations Across the Product Life-Cycle
The CIRP Conference on Computer Aided Tolerancing"Geometric Variations within Product Life-Cycle Management", 2009
(go to journal)

HAMMADI M., CHOLEY J., LOUATI J., RIVIERE A., HADDAR M.
Contribution à l’intégration des outils de modélisation en mécatronique
CMSM, Hammamet, 2009

Guillaume MANDIL , Alain DESROCHERS , Alain RIVIERE
Framework for the Monitoring of Functional Requirements Along the Product Life Cycle
Conférance :"Conception & Production Intégrées 2009", 2009
(go to journal)

Régis PLATEAUX, Olivia PENAS, Faïda MHENNI, Jean-Yves CHOLEY, Alain RIVIERE
Introduction of the 3D Geometrical Constraints in Modelica
Modelica Conference, 2009
(go to journal)

M'HENNI F., PLATEAUX R., CHOLEY J., PENAS O., RIVIERE A.
Modelica/Dymola, langage et environnement de simulation universel ?

ROUMIZADEH Behrouz, Choley Jean-Yves, Plateaux Regis, Penas Oolivia, Riviere Alain
Pre-Designing an Electronic Card Using a Multi-Domain Models Approach with DYMOLA
Modelica 2009, 2009

SOCOLIUC M., RIVIERE A., BUYSSE D
Towards a specification of the Functional Mock-Up and its digital link with the Digital Mock-Up.
11th CIRP International Conference on Computer Aided Tolerancing, France - Annecy CIRP-CAT’09, 2009

Plateaux R., Choley J.Y., Penas O., Rivière A.
Towards an Integrated Mechatronic Design Process
IEEE International Conference of Mechatronics, 2009
ISBN 978-1-4244-4194-5

HAMMADI Moncef, CHOLEY Jean-YVES, RIVIERE Alain, LOUATI Jamel, HADDAR Mohamed
Modélisation d’un système mécatronique en utilisant MODELICA : Application à une motorisation hybride parallèle
Cotume, Hammamet, 2008

PLATEAUX R., CHOLEY J-Y., PENAS O.,RIVIERE A., CARDON F., CLEMENT A.
A Piezoelectric Mechatronic Systems Modelling Based on a Topological Analysis
Mechatronics, 2008

MOINET M., SERRE P., RIVIERE A.
Modélisation déclarative et transformation d'un objet géométrique sous contraintes
7ème Conférence Internationale de Modélisation et Simulation, MOSIM'08, 31 mars - 2 avril, Paris (France), 2008

SOCOLIUC M., RIVIERE A., BUYSSE D
Towards a hybrid method of tolerance validationduring the first design stages
IDMME - Virtual Concept 2008Beijing, China, October 13 – 15, 2008, 2008

MHENNI F., SERRE P., MLIKA A., ROMDHANE L., RIVIERE A.
Geometric compatibility equations for overconstrained mechanisms
2nd Conférence Internationale de Conception et Modélisation des Systèmes Mécaniques (CMSM'07), Monastir (Tunisie), March 19-21, 2007

SOCOLIUC M., RIVIERE A., BUYSSE D
A new specification model for realistic assemblies
10th CIRP International Conference on Computer Aided Tolerancing, Erlangen - Germany 2007, 2007

M'HENNI F., SERRE P., MLIKA A., ROMDHANE L., RIVIERE A.
Dependency between Dimensional Deviations in Overconstrained Mechanisms
International Conference on Integrated Design and Production (CPI'2007), Rabat (Morocco), October 22-24, 2007

BELLACICCO A., SELLAKH R., RIVIERE A.
Méthode de conception collaborative appliquée à la maquette 3D
5th International Conference of Integrated Design and Production, Rabat, Morocco, 23-24 October, ed. CPI, 2007

MOINET M., SERRE P., RIVIERE A., CLEMENT A.
Modelling of the Transformation of an Object defined by Geometric Constraints
Conception et Production Intégrée (CPI'2007), Rabat (Maroc), 22-24 Octobre, 2007

PLATEAUX R., PENAS O., RIVIERE A., CHOLEY J-Y.
Need for the definition of a topological structure for the complex systems modelling
CPI 2007, 2007

SOCOLIUC M., RIVIERE A., BUYSSE D
Towards a new digital functional validation process.
5th International Conference : Integrated Design and Production, Morocco - Rabat CPI’07, 2007

BELLACICCO A., SELLAKH R., RIVIERE A.
A New Rational method for 3D tolerancing of process
Proceeding of the 6th IDMME conference, Grenoble, France, May 17-19, ed. IDMME, 2006

SERRE P., RIVIERE A., MOINET M., CLEMENT A.
Modelling to Modify a Digital Mockup
6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2006), Grenoble (France), May 17-19, 2006

SERRE P., RIVIERE A., CLEMENT A.
Dependence and Independence of Variations of a Geometric Object
9th CIRP International Seminar on Computer-Aided Tolerancing, Tempe (USA), April 11-12, 2005

BELLACICCO A., AROTCARENA P, SELLAKH R., RIVIERE A.
Méthode de tolérancement du process
1er Congrès International Conception et Modélisation des systèmes mécaniques CMSM, Hammamet, Tunisie, 23-25 Mars, ed. CMSM, 2005

BELLACICCO A., AROTCARENA P, SELLAKH R., RIVIERE A.
Rational method for 3D tolerancing of process
The 9th CIRP International Seminar on Computer-Aided Tolerancing, Tempe-Arizona, USA, 10-12 April, ed. 9ème CIRP, Tempe, 2005

CHOLEY J., MARCHAND F., RIVIERE A., CLEMENT A.
A complementary specification for metrology: the association criterion
IDMME The 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath (UK), 5-7 April 2004, 2004

BELLACICCO A., MARCHAND F., SELLAKH R., RIVIERE A.
Method for generating a 3D tolerancing schema applied to mechanisms
IDMME The 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath (UK), 5-7 April 2004, 2004

CLEMENT A, RIVIERE A., SERRE P.
New Technology for Solving Large-Scale Geometrical Networks
isiCAD-2004, Novosibirsk (Russia), June 21-23, 2004

RIVIERE A., SERRE P., MALGRAS E., CLEMENT A.
The Declarative Approach a New Paradigm for CAD/CAM Systems
4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento (Italy), 30 june- 2 July, 2004, 2004

SERRE P., RIVIERE A., MALGRAS E., CLEMENT A.
Toward a Declarative Approach for CAD-CAM Systems
5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2004), Bath (UK), April 5-7, 2004

TOULORGE H., BUYSSE D., CLEMENT A., RIVIERE A.
Towards a ditigal functional assistance module to joint specification
IDMME The 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath (UK), 5-7 April 2004, 2004

SERRE P., RIVIERE A., CLEMENT A,
The Clearance Effect for Assemblability of Over-Constrained Mechanisms
8th CIRP International Seminar on Computer-Aided Tolerancing, Charlotte (USA), April 28-29, 2003

RIVIERE A., TOULORGE H., SELLAKH R., BELLACICCO A.
Towards a digital functional assistance module to linkage specification integrated into a digital design process
International Mechanical Engineering Congress and RD&D Expo, November 15-21, 2003, Washington D.C., USA, 2003

CHOLEY J., RIVIERE A.
Variation of geometrical parameters for datum association
8th CIRP International Seminar on Computer-Aided Tolerancing, April 28-29, 2003, Charlotte, USA, 2003

CHOLEY J., RIVIERE A.
Variation of the geometrical parameters for datum association
CIRP 2003, Charlotte, North Carolina, USA, 2003

CHOLEY J., RIVIERE A.
Identification of a reference frame by a combinatory methods
Proceeding of the 4th IDMME, International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Clermont Ferrand, 2002

SERRE P., CLEMENT A., RIVIERE A.
Vers une approche déclarative en CFAO. Application au mécanisme de Bennett
4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2002), Clermont-Ferrand (France), May 14-16, 2002

SELLAKH R., RIVIERE A., CHEVASSUS N., MARGUET B.
An assisted method for specifying ISO tolerances applied to structural assemblies
7th CIRP International Seminar on computer Aided Tolerancing, ENS Cachan, France, 2001

SERRE P., RIVIERE A., CLEMENT A.
Analysis of Functional Geometrical Specification
7th CIRP International Seminar on Computer-Aided Tolerancing, Cachan (France), April 24-25, 2001

SERRE P., RIVIERE A., DUONG A.-N., ORTUZAR A.
Analysis of Geometric Specification
Design Technical Engineering Conference (DETC2001), Pittsburgh (Pennsylvania, USA), September 9-12, 2001

RIVIERE A., SELLAKH R., CLEMENT A., SELLEM E.
Experimentation of tolerance analysis for compliant assemblies
The 7th International Conference ATA 2001, 23-25 may 2001, Florence, Italy, 2001

SELLEM E., SELLAKH R., RIVIERE A.
Testing of tolerance analysis module for industrial interest
7th CIRP International Seminar on computer Aided Tolerancing, ENS Cachan, France, 2001

CLEMENT A., RIVIERE A., SERRE P.
Définition formelle du tolérancement en CAO et en métrologie
3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montreal (Canada), May 16-19, 2000

SELLEM E, RIVIERE S.
Simulation of geometric imperfections of deformable assemblies in CAD/CAM
Symposium on assembly systems, vol. 11, pp. 9-14, ed. ASME, 2000

RIVIERE A., CHOLEY J.
Identification d’un système de référence avec le minimax : méthode combinatoire et torseur des petits déplacements
International Conference, « integrated Design and Production », Tanger Morroco, pp. 206-215, 1999

SELLEM E., DE HILLERIN C., CLEMENT A., RIVIERE A.
Modeling – Simulation – Testing of Compliant Assemblies
Global Consistency of Tolerances, Proceedings of the 6th CIRP International Seminar on Computer-Aided Tolerancing, University of Twente, Enschede, The Netherlands, pp. 55-62, ed. KLUWERS ACADEMIC PUBLISHERS, 1999

LE PIVERT P., RIVIERE A.
Towards realistic simulation of machining processes
Proceedings of the 6th CIRP International Seminar on Computer-Aided Tolerancing, University of Twente, Enschede, The Netherlands, pp. 55-62, ed. KLUWERS ACADEMIC PUBLISHERS, 1999

SELLEM E., RIVIERE A., DE HILLERIN C., CLEMENT A.
Validation of the tolerance analysis of compliant assemblies
Proceedings of DETC 99: ASME Design Engineering Technical Conference, Las Vegas, Nevada, 1999

CLEMENT A., RIVIERE A., SERRE P.
A Declarative Approach for Geometry and Topology: a New Paradigm for CAD-CAM Systems
2nd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 1998), Compiègne (France), May 27-29, 1998

CLEMENT A., RIVIERE A.
A mathematical and technological analysis of contacts
IEEE, International conference on robotics and automation, 1998

CUBELES - VALADE C., RIVIERE A.
Nominal and actual geometry explicit declaration. Application to dimensional inspection
Integrated Design and Manufacturing in Mechanical Engineering 1998, Compiègne, pp. 357-364, ed. KLUWERS ACADEMIC PUBLISHERS, 1998

SELLEM E., RIVIERE A.
Tolerance Analysis of deformable assemblies
ASME Design Automation conference, Atlanta, 1998

CLEMENT A., RIVIERE A., SERRE P., VALADE C.
The TTRS: 13 Constraints for Dimensioning and Tolerancing
5th CIRP International Seminar on Computer-Aided Tolerancing, Toronto (Canada), April 27-29, 1997

CLEMENT A., LE PIVERT P., RIVIERE A.
Modélisation des procédés d’usinage - Simulation 3D réaliste
First International Conference, IDMME 96 Nantes, pp. 355-364, 1996

CLEMENT A., RIVIERE A., SERRE P.
A Declarative Information Model for Functional Requirements
4th CIRP International Seminar on Computer-Aided Tolerancing, Tokyo (Japan), April 5-6, 1995, 1995

• Communications dans des colloques francophones

Ghazoi HAMZA, Jean-Yves CHOLEY, Moncef HAMMADI, Maher BARKALLAH, Jamel LOUATI, Alain RIVERE, Mohamed HADDAR
An analytical method for the preliminary design of a mechatronic design
2ème Journées des Systèmes Mécatroniques, 17-20 mars 2014, Mahdia-Tunisie, 2014

Moncef Hammadi, Jean-Yves Choley , Olivia Penas et Alain Rivière
Intégration de la simulation multi-physique 0D-3D en utilisant la technique de méta-modélisation
GDR SYSME / IS3C, juin , 2012

Roberta Costa Affonso, Vincent Cheutet, Mohamed Ayadi, Alain Rivière, Mohamed Haddar
Simulations dans le cycle de vie du produit : vers une meilleure gestion d'informations dans un projet de conception
1er Conférence Internationale sur La Gestion de Projet CIGP'12, 2012

Mohamed AYADI, Roberta COSTA AFFONSO, Vincent CHEUTET, Faouzi MASMOUDI, Alain RIVIERE, Mohamed HADDAR
Proposition d’un modèle d’intégration des simulations pour l’Usine Numérique
CPI 2011, 2011

ROUMIZADEH Behrouz, CHOLEY Jean-Yves, PLATEAUX Regis, PENAS Olivia, RIVIERE Alain
A 3DLogic modeling for 3D electronic circuits (3D-MID)
CFM 2009, 2009

R. PLATEAUX, O. PENAS, F. MHENNI, J-Y. CHOLEY, B. ROUMIZADEH, A. RIVIÈRE
Vers un environnement intégré pour le prédimensionnement – Modelica 3D

PLATEAUX R., PENAS O., RIVIERE A., CHOLEY J-Y.
Vers un outil unique de modélisation mécatronique ?
10ème AIP PRIMECA 2007, ed. La Plagne, 2007

SERRE P., RIVIERE A., THOMAS M.
Une modélisation variationnelle pour optimiser la modification d'une maquette numérique
Journées Internationales d'études (ITCT 2006) (Vers des Ingénieries & des Technologies Communes aux Transports terrestres, maritimes, aériens et spatiaux, Paris (France), 20-23 Novembre, 2006

RIVIERE A.
Vers une CFAO de plus en plus déclarative
CMSM’05, March 23-25, 2005, Hammamet, 2005

CHOLEY J., RIVIERE A.
Association de references specifiées par variation paramétrique de la géométrie nominale
Colloque AIP-PRIMECA, La Plagne, mars 2003, 2003

CHOLEY J., RIVIERE A.
GPS – Association des références spécifiées par variation paramétrique de la géométrie nominale
PRIMECA 2003, La Plagne, 2003

TOULORGE H., RIVIERE A., BELLACICCO A., SELLAKH R.
Développement d’une méthode d’assistance fonctionnelle au tolérancement
Proceeding of the 4th IDMME, International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Clermont Ferrand, 2002

CHOLEY J., RIVIERE A.
GPS – Identification d’une référence commune par méthode combinatoire avec torseur des petits déplacements
IDMME 2002, Clermont-Ferrand, 2002

CHOLEY J., RIVIERE A.
Le tolérancement fonctionnel en CFAO : une exigence pour la métrologie
MICAD 2002, Paris, 2002

CHOLEY J., RIVIERE A.
Le tolérancement fonctionnel en CFAO: une exigence pour la métrologie
In MICAD, 21ème exposition et conférences internationales sur la CFAO, la simulation et les nouvelles technologies de conception et de fabrication, paris, 2002

SERRE P., RIVIERE A.
Analyse d'une spécification géométrique
7ème colloque national PRIMECA sur la conception intégrée, La Plagne (France), 2-4 Avril, 2001

CHOLEY J., RIVIERE A.
Identification d’un système de référence avec le minimax : méthode combinatoire et torseur des petits déplacements
CPI 99, Tanger, 1999

LE PIVERT P., RIVIERE A.
Modélisation et Simulation des process d’usinage
6 ième Assises du Prototypage rapide et de la Simulation numérique, Paris La Défense, 1997

MARCHAND F., RIVIERE A.
Un module d’information intégré pour les gammes d’usinage
First International Conference, IDMME 96, Nantes, pp. 857-866, 1996